|Mark||Analogue||W. Nr.||Aisi Uns||En||Order|
|Л63||2.0321||C27200||CuZn37||Delivery from the stock, in stock|
|ЛО62||2.0530||c46400||~CuZn39Sn1||Delivery from the stock, in stock|
|Л68||2.0280||CuZn33||Delivery from the stock, in stock|
|Л80||2.0250||CuZn20||Delivery from the stock, in stock|
|Л85||~CuZn15||Delivery from the stock, in stock|
|Л90||C52400||CuZn10||Delivery from the stock, in stock|
|ЛМц58-2||2.0572||CuZn40Mn2||Delivery from the stock, in stock|
|ЛС59||Delivery from the stock, in stock|
Dignity brass plate
Brass — an alloy based on copper and zinc. High technology makes the brass are widely demanded in modern production. It is available to any types of processing: hot and cold-rolling, cutting, milling. Easily drilled, soldered and welded, has a high heat and electric conductivity, aesthetic appearance. In effect of alloying elements it is more durable and resistant to corrosion than copper, it also meets the most stringent sanitary requirements. Reliability, serviceability in wide temperature range, ease of installation and durability — make a brass plate is highly valuable semi-finished product. In addition, brass relatively inexpensive, and after the disposal, it is usually used again.
Brass plate enough technologically, but inferior in strength and heat resistance to other metals and alloys.
|L63, LO62−1, LS59−1, Lmc58−2||GOST 15 527||20−150x600−2500x100x3500|
|L63, L68, L80, L85, L90, Lmc58−2, LO62−1, LS59−1.||GOST 15 527||20−150x600−2500x100x3500|
The thickness of the hot rolled sheet is 5−25mm, cold-rolled of 0.4 — 12mm.
At ATSM B248 stove is considered to be prefabricated with a width of более305 mm and a thickness of more than 4.8 mm. to BS 2875 (Great Britain) the plates are flat deformed semi-finished products, of a width exceeding 305 mm and a thickness exceeding 9.5 mm. According to DIN 17 600 (Germany) plate — flat rolled thickness exceeding 5 mm.
|According to the method of production||For precision manufacturing||Specification (special conditions)||According to the method of production||As material||Type|
D drawn (headnode.)
And normal in width and increased in thickness,
To increased width and normal thickness
N normal accuracy;
Tons of solid,
On very hard
Example of marking Plate LPRM 6x1500x2500 Л68ГОСТ 931−90: cold-rolled brass plate L68, soft, thickness 6 mm, width 1500 mm, length 2500 mm.
Due to its advantages, brass plate is widely demanded in modern industry: energy, mechanical engineering, production of ships, aircraft and medical equipment. Brass plate manufacture components of equipment and engines, construction and decorative designs. In the shipbuilding industry can not do without it because of its corrosion resistance. In electrical engineering it is necessary because of its high conductivity for electrical parts of the valve. Brass bars and plates are used in sculpture and architecture decoration of facades and interiors, the production of plaques, markers and signs.
Supplied certified brass sheet and plate (GOST 931−90 with the chemical composition according to GOST 15 527) at the best price. In the technical documentation included data on the percentage composition and performance products. We can easily buy in bulk any semi-finished products parameters for major productions. We also work with retail buyers. A high level of service and speed of service are the face of our company.
Buy at best price
On the website LLC «Electrocentury-steel» reflects the most current information on the acquisition of brass rolling today. Our best managers are ready to provide qualified advice on any current issues. Sell semi-finished products of non-ferrous metals at a competitive price. The products are manufactured on the most modern equipment and meets the quality requirements of Russian state standard and international quality standards. All products undergo ultrasonic inspection for defects. Regular customers receive a discount system of discounts.