Circle, bar БрКМц3-1 - CuSi3Mn1 - C65500
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
BrKMts3-1 | C65500 | CuSi3Mn1 | Delivery from the stock, in stock |
Vendor
We offer to buy bronze circles, bars BrKMZ3-1 - C65500 at an affordable price from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with modern quality standards. Supplier Evek GmbH offers to buy bronze circle, bar BrKMts3-1 -C65500, price - optimal in this segment of rolled products.
Technical characteristics
Silicon tin-free bronze, processed by pressure. Corrosion-resistant alloy is well welded, heat-resistant, has high compression resistance. Coefficient of friction with grease 0.013. Coefficient of friction without grease 0.4. Hot work temperature 750 - 850 °C. Annealing temperature 700 - 750 °C.
Percentage composition
Fe | Si | Mn | Ni | Cu | Pb | Zn | Sn | Impurities |
---|---|---|---|---|---|---|---|---|
≤0.3 | 2.7 - 3.5 | 1 - 1.5 | ≤0.2 | 94 - 96.3 | ≤0.03 | ≤0.5 | ≤0.25 | ≤1 |
Range | GOST. | s in | d5 | HB 10 -1 | Heat treatment |
---|---|---|---|---|---|
- | - | MPa | % | MPa | - |
Solid bars | 1628-78 | 490 | 10-15 | 120-150 | Hardened |
Pressed bars | 1628-78 | 340 | 20 | Annealing |
Physical material properties
t°C | E 10- 5 | a 10 6 | l | r | C | R 10 9 |
---|---|---|---|---|---|---|
Degree | MPa | 1/Gradus | W/(m-degree) | g/cm3 | J/(kg-degree) | Ohm-m |
20° | 1.15 | 46 | 8,47 | 150 | ||
100° | 18 | 377 |
Sv - Ultimate Short-Term Strength
sT - Limit of proportionality (yield strength for permanent deformation)
d5 - Tensile elongation at break.
HB - Brinell hardness
E - Modulus of elasticity of the first kind
C - specific heat capacity
Analogues
Inter | England | Austria | EU | Italy | Poland | USA | Czech Republic |
---|---|---|---|---|---|---|---|
ISO | BS | ONORM | EN | UNI | PN | AISI | CSN |
CuSi3Mn1 | CS101 | CuSi3Mn | CuSi3Mn1 | PCuSiMn1 | CuSi3Mn1 | C65500 | 423053 |
CW116C | C65800 |
Buy, bargain price
We offer bronze circles, bars BrKMts3-1, price - determined by the technological features of production without the inclusion of additional costs. You can order the products of non-standard parameters. We have the best price-quality ratio for the whole range of products. In the segment of non-ferrous rolled products Evek GmbH is a profitable supplier.