Aluminium A95

  • Aluminum A0
  • Aluminum A35
  • Aluminum A5
  • Aluminum A5E
  • Aluminum A6
  • Aluminum A7
  • Aluminum A7E
  • Aluminum A8
  • Aluminum A85
  • Aluminum A95
  • Aluminum A97
  • Aluminum A98
  • Aluminum A99
  • Aluminum A995
  • Aluminum A7E

    • Designation

    Name The value
    Designation GOST Cyrillic А95
    Designation GOST Latin A95
    Transliteration A95
    By chemical elements -

    Description

    Aluminium A95 is used: for the production of drawn wire; ingots, billets cast by semi-continuous method or continuous casting, and is intended for rolling into sheets, strips and other semi-finished products, wire rod; aluminum Kommandos powder brands APS-1A and APS-1B, APS-2, APS-3 is intended for the production teploperenosa deformable material type SAP.

    Note

    High purity aluminium.

    Standards

    Name Code Standards
    Hard alloys, ceramic-metal products and metal powder В56 GOST 10096-76
    Bars and shapes В52 GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92
    Non-ferrous metals, including rare, and their alloys В51 GOST 9498-79, GOST 11069-2001, GOST 11070-74, GOST 19437-81
    Wire from nonferrous metals and their alloys В74 OST 1 92005-2002

    Chemical composition

    Standard Mn Si Fe Cu Al Ti Zn Mg
    GOST 11069-2001 ≤0.002 ≤0.02 ≤0.025 ≤0.01 ≥99.95 ≤0.002 ≤0.005 ≤0.005
    Al is the base.
    According to GOST 19437-81 and GOST 11069-2001, the Ga content is 0.0030%. The content of other impurities (individually) is ≤ 0.005%. The total content of all impurities is ≤ 0.050%.

    Mechanical properties

    σU, MPa d5, %
    The sheet is thin. After annealing
    ≥110 ≥24

    Description mechanical marks

    Name Description
    σU Limit short-term strength
    d5 Elongation after rupture