Alloy Amg0,5 (1505)

Designation

Name The value
Designation GOST Cyrillic АМг0,5
Designation GOST Latin AMg0,5
Transliteration AMg05
By chemical elements -
Name The value
Designation GOST Cyrillic 1505
Designation GOST Latin 1505
Transliteration 1505
By chemical elements 1505

Description

Alloy Amg0,5 is used: for the manufacture of strips; welded and riveted structural elements of aircraft construction and shipbuilding, experiencing a relatively light load and require high corrosion resistance.

Note

The high quality alloy system Al-Mg.

Standards

Name Code Standards
Non-ferrous metals, including rare, and their alloys В51 GOST 4784-97, OST 1 92014-90
Bars and shapes В52 OST 1 92093-83
Tape В54 OST 1-92006-79, TU 1-1-71-75

Chemical composition

Standard Mn Si Fe Cu Al Mg
GOST 4784-97 ≤0.2 ≤0.1 ≤0.1 ≤0.1 Rest 0.4-0.8
OST 1 92014-90 ≤0.2 ≤0.1 ≤0.1 ≤0.1 Rest 0.4-0.8
Al is the base.
According to GOST 4784-97, OST 1 92014-90 mass fraction of each other impurity (not regulated) ≤ 0.05%, total mass fraction of other impurities ≤ 0.10%.

Mechanical properties

Section, mm σU, MPa d
The tape is able to supply for OST 1-92006-79
0.8-2 ≥107.6 ≥10

Description mechanical marks

Name Description
σU Limit short-term strength
d Elongation after rupture

Physical characteristics

Temperature r, kg/m3
20 2700

A description of the physical symbols

Name Description
Е The normal elasticity modulus
l Coefficient of thermal conductivity
С Specific heat

Technological properties

Name The value
Weldability The alloy is well welded all types of welding - TIG, contact, spot, and seam welding. The corrosion resistance of the alloy (and the weld) high, is almost the same as that of pure aluminum.
Machinability The poor machinability in the annealed condition and satisfactory cold-worked.
Pressure treatment Well-deformed in hot and cold condition.
Corrosion resistance Alloy with excellent General corrosion resistance, not cloned to stress corrosion cracking and intergranular corrosion (especially in the annealed condition). For additional protection parts against corrosion is anodizing or applied coatings.
Soldering Alloy satisfactorily soldered.