Alloy AMg6 (1560)

Designation

Name The value
Designation GOST Cyrillic АМг6
Designation GOST Latin AMg6
Transliteration AMg6
By chemical elements -
Name The value
Designation GOST Cyrillic 1560
Designation GOST Latin 1560
Transliteration 1560
By chemical elements 1560

Description

Alloy AMg6 is used: for the manufacture of ingots and slabs, semi-finished products (sheets, tapes, strips, plates, profiles, panels, pipes, wire, welding wire Svamg6, stampings and forgings) by hot or cold deformation; ring blanks manufactured by free forging and rolling machinery; parts of the internal planes of welded tanks and fuel tanks of cross-sectional area of 200 cm2 and a diameter of circumcircle up to 350mm suitable for use in the aviation industry and special machine building industries; extruded panels of constant cross section with longitudinal fins in the aircraft industry, is made by a sweep of extruded finned tubes in the plane of the width of the fabric up to 2100 mm; oversized extruded pipe; seamless cold-deformed pipes of large; bimetallic sheets with steel 12X18H10T, is designed to manufacture flat adapter General purpose.

Note

The alloy system Al-Mg.

Standards

Name Code Standards
Tape В54 GOST 13726-97
Sheets and strips В53 GOST 17232-99, GOST 21631-76, OST 1 92000-90, OST 1 92001-90, OST 4.021.047-92, OST 4.021.061-92, TU 1-2-420-82, TU 1-2-480-86, TU 1-3-083-88, TU 1-3-89-79, TU 1-9-1021-84, TU 1-9-1-84, TU 1-9-556-79, TU 1-9-629-87, TU 1-9-1021-2008
Tubes of non-ferrous metals and alloys В64 GOST 18482-79, OST 1 92096-83, OST 1 92048-90, OST 1 92002-83, OST 1 92100-83, OST 1 92101-83, OST 1 92048-76, OST 4.021.120-92, TU 1-2-152-79, TU 1-2-467-84, TU 1-4-122-88, TU 1-4-251-89, TU 1-83-29-76, TU 1-9-1009-76, TU 1-9-102-71, TU 1-9-182-75, TU 1-9-329-75, TU 1-9-979-75
Bars В55 GOST 21488-97, OST 1 90395-91, OST 4.021.017-92
Non-ferrous metals, including rare, and their alloys В51 GOST 4784-97, OST 1 41306-72, OST 4.021.009-92, TU 1-4-008-77, TU 1-4-030-79
Bars and shapes В52 GOST 8617-81, GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92, OST 1 92093-83, OST 1 92041-90, OST 1 92066-91, OST 1 92067-92, OST 1 92069-77, OST 1 90113-86, OST 1 90177-75, OST 4.021.133-92, OST 4.021.134-92, OST 4.021.137-92, OST 1 92007-87, TU 1-2-351-75, TU 1-2-441-82, TU 1-2-475-85
Norms for calculation and design В02 OST 1 00154-74
Processing of metals by pressure. Forgings В03 OST 26-01-152-82, OST 1 92003-71, OST 1 90073-85

Chemical composition

Standard Mn Si Fe Cu Al Ti Zn Mg Be
GOST 4784-97 0.5-0.8 ≤0.4 ≤0.4 ≤0.1 Rest 0.02-0.1 ≤0.2 5.8-6.8 0.0002-0.005
Al is the base.
According to GOST 4784-97, the mass fraction of each other impurity (not regulated) ≤ 0.05%, the total mass fraction of other impurities ≤ 0.10%.
For the production of welding wire SvMg6, the alloy should have the following chemical composition: Al-base, Mg = 5.80-6.80%, Mn = 0.50-0.80%, Ti = 0.10-0.20%, Be = 0,002-0,005%, Si ≤0,40%, Cu ≤ 0,10%, Fe ≤ 0,40%, Zn ≤ 0,20%, mass fraction of each other impurity (not regulated) ≤ 0,1%, total the mass fraction of all impurities is ≤ 1.20%. The ratio of iron and silicon in the alloy SAGAM6 should be no more than one.

Mechanical properties

Section, mm sT|s0,2, MPa σU, MPa d5, % d HB, MPa
Ring billet is forged and rolled at THAT 1-4-030-79. Annealed and without annealing. The samples along the direction of the fibers (chordal). In the column "Ratio" is the weight of workpiece in kg
≤30 ≥157 ≥314 - ≥15 -
30-60 ≥128 ≥294 - ≥14 -
60-2500 ≥118 ≥285 - ≥11 -
Ring billet is forged and rolled at THAT 1-4-030-79. Annealed and without annealing. Samples across the direction of the fiber (axial). In the column "Ratio" is the weight of workpiece in kg
≤30 ≥128 ≥304 - ≥14 -
30-60 ≥128 ≥294 - ≥14 -
60-2500 ≥118 ≥285 - ≥11 -
Ring billet is forged and rolled at THAT 1-4-030-79. Annealed and without annealing. Samples across the direction of the fiber (radial). In the column "Ratio" is the weight of workpiece in kg
≤30 - ≥304 - ≥14 -
30-60 - ≥294 - ≥14 -
60-2500 - ≥285 - ≥11 -
Sheet metal in delivery condition of alloy AMg6 and СМг6Б (B with plating technology) according to GOST 21631-76, OST 4.021.047-92 tape according to GOST 13726-97 (samples transverse)
5-10.5 ≥155 ≥315 - ≥15 -
0.5-0.6 ≥145 ≥305 - ≥15 -
0.6-10.5 ≥155 ≥315 - ≥15 -
Sheet metal in delivery condition of alloy СМг6У (with thickened plating) according to GOST 21631-76 (samples transverse)
2-5.5 ≥130 ≥275 - ≥15 -
The leaves are of higher quality susanyi supply for OST 1 92000-90 (in delivery condition designation grade alloy taking into account plating and condition of the material)
5-10.5 ≥155 ≥315 - ≥15 -
0.8-10.5 ≥155 ≥315 - ≥15 -
3-10.5 ≥175 ≥335 - ≥15 -
0.8-10.5 ≥285 ≥375 - ≥6 -
3-10.5 285-355 375-430 - ≥6 -
2-10.5 ≥330 ≥410 - ≥5.5 -
0.5-0.7 ≥120 ≥255 - ≥15 -
0.8-5.5 ≥130 ≥275 - ≥15 -
7 ≥175 ≥315 - ≥15 -
Panel OST 1 90177-75. In the column of the delivery condition includes a direction of cutting out of samples
- ≥157 ≥314 - ≥15 -
Panels are extruded with fins on OST 1 92041-90 on delivery
≥155 ≥3154 - ≥15 -
Plates according to GOST 17232-99. 4.021.061-92, OST 4.021.061-92 supplied without heat treatment (samples transverse)
11-25 ≥145 ≥305 - ≥11 -
25-50 ≥135 ≥295 - ≥6 -
50-80 ≥130 ≥275 - ≥4 -
Plates of higher quality according to OST 1 92001-90
11-20 ≥155 ≥315 - ≥15 -
11-13 ≥175 ≥335 - ≥15 -
11-16 ≥285 ≥375 - ≥6 -
11-15 ≥330 ≥420 - ≥5.5 -
11-20 ≥155 ≥315 - ≥11 -
> 20-50 ≥135 ≥295 - ≥6 -
> 50-80 ≥130 ≥275 - ≥4 -
Forgings for OST 1 90073-85. Mode M (indicated by the direction of samples)
≤75 ≥130 ≥305 - ≥14 ≥65
100-300 ≥120 ≥285 - ≥11 ≥65
75-100 ≥130 ≥295 - ≥14 ≥65
≤75 ≥155 ≥315 - ≥15 ≥65
100-300 ≥120 ≥285 - ≥11 ≥65
75-100 ≥130 ≥295 - ≥14 ≥65
Forging after annealing at OST 26-01-152-82
≥160 ≥320 ≥15 - ≥65
Profiles hot rolled as supplied
≥190 ≥355 - ≥19.5 ≥65
Extruded normal strength according to GOST 8617-81 on delivery
≥157 ≥314 - ≥15 -
Extruded normal strength with the cross-sectional area 200 cm2 and a diameter of the circumscribed circle of up to 350 mm. (longitudinal sample)
≥155 ≥315 - ≥15 -
Round bars normal strength in the delivery condition in the OST 4.021.017-92 (longitudinal samples)
8-250 ≥155 ≥315 - ≥15 -
The pressed bars normal strength in the delivery condition according to GOST 21488-97 (longitudinal samples)
300-400 ≥120 ≥285 - ≥15 -
8-300 ≥155 ≥315 - ≥15 -
Tubes seamless cold-drawn square (10x10 - 90x90 mm), rectangular (10х14 - 60х120 mm) OST 1 92096-83, round to EAST 4.021.120-92 (in cross-section shows the thickness of the wall)
≥145 ≥315 - ≥15 -
≥195 ≥345 - ≥5 -
Seamless cold-deformed pipes of large annealed in delivery condition on OST 1 92101-83
≥165 ≥325 - ≥10 -
Tubes extruded in the state of delivery according to GOST 18482-79 (samples, in cross-section shows the thickness of the wall)
2.5-40 ≥145 ≥315 - ≥15 -
Tubes extruded in the delivered state for OST 1 92100-83. In the graph section of the specified diameter of pipes
500 ≥145 ≥315 - ≥15 -
0.5 ≥135 ≥295 - ≥12 -
500 ≥145 ≥315 - - -
0.5 ≥135 ≥295 - - -
Large-size extruded tubes according to OST 1 92048-76 on delivery
≥147 ≥314 - ≥12 -

Description mechanical marks

Name Description
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σU Limit short-term strength
d5 Elongation after rupture
d Elongation after rupture
HB Brinell hardness number

Physical characteristics

Temperature Е, HPa r, kg/m3 R, Mr. · m
20 71 2640 673

A description of the physical symbols

Name Description
Е The normal elasticity modulus
r Density
l Coefficient of thermal conductivity
R UD. the resistivity
С Specific heat

Technological properties

Name The value
Weldability The alloy is well welded all types of welding - TIG, contact, spot, and seam welding. Weld joint efficiency is 0.9-0.95 % of the strength of the basic material.
Pressure treatment Well-deformed in hot and cold condition.
Features of heat treatment Not heat-treatable alloy.
Corrosion resistance Alloy with excellent General corrosion resistance, not cloned to stress corrosion cracking and intergranular corrosion (especially in the annealed condition). For additional protection parts against corrosion is anodizing or applied coatings. The corrosion resistance of the alloy (and the weld) high, is almost the same as that of pure aluminum.
Machinability Machinability is good.