Alloy PUNCH-11

  • Alloy PANCH-11
  • Alloy Sv-03H20N45G6M6B (EP953)
  • Alloy Св-08Х20Н57М8В8Т3Р (EP533)
  • Alloy Sv-08X25N25M3 (EP622)
  • Alloy Sv-08Х25Н40М7 (EP673)
  • Alloy Sv-08Х25Н60М10 (EP606)
  • Alloy Sv-36NGMT (EP803)
  • Alloy SvHN60MVU (ChS40)

    • Designation

    Name The value
    Designation GOST Cyrillic ПАНЧ-11
    Designation GOST Latin PAHCh-11
    Transliteration PANCh-11
    By chemical elements ПAlNiЧ-11

    Description

    Alloy PANCH-11 is used: for the production of welding wire with a diameter of 1.2 mm, intended for welding and surfacing.

    Note

    Low alloy Nickel alloy.

    Standards

    Name Code Standards
    Non-ferrous metals, including rare, and their alloys В51 GOST 28873-90
    Welding and cutting metals. Soldering, riveting В05 TU 48-21-593-85

    Chemical composition

    Standard C Mn Si Ni Fe Cu
    TU 48-21-593-85 ≤0.3 5-6 ≤0.3 Rest ≤2 2.3-3
    Ni is the basis.
    According to TU 48-21-593-85 the chemical composition is given for the alloy PANCH-11 vacuum melt. The normalized sum of rare-earth elements (REE) in the alloy should be in the range of 0.20-0.40%. The sum of the remaining impurities (not indicated in the table) should not be more than 0.30%.

    Technological properties

    Name The value
    Particularities of production of goods Wire on the other 48-21-593-85 comes in hard (unannealed) condition. By agreement with consumer it is permitted to produce wire diameters: 1,40; 1,60; 1,80; 2,00; 2,5; 3,00; 3,50; 4,00.