Alloy В96Ц3 (1965-1)

Designation

Name The value
Designation GOST Cyrillic В96Ц3
Designation GOST Latin B96Ts3
Transliteration V96Ts3
By chemical elements В96Zn3
Name The value
Designation GOST Cyrillic 1965-1
Designation GOST Latin 1965-1
Transliteration 1965-1
By chemical elements 1965-1

Description

Alloy В96Ц3 used: for the production of semi — finished products long rolled plates, sheets and extruded sections and panels used for the upper wing panels, struts, beams and other elements in the mainly compressed areas of the airframe promising aircraft designs. Alloy mastered the casting of large round and flat ingots.

Note

Alloy instead of the alloy type V95och-T2. The alloy has good technological plasticity in the manufacture of semi-finished products in metallurgical production.

Standards

Name Code Standards
Non-ferrous metals, including rare, and their alloys В51 OST 1 90048-90
Bars В55 TU 1-2-440-82, TU 1-4-208-87

Chemical composition

Standard Mn Cr Si Fe Cu Al Ti Zn Zr Mg
OST 1 90048-90 ≤0.05 ≤0.05 ≤0.1 ≤0.2 1.4-2 Rest ≤0.05 7.6-8.6 0.1-0.2 1.7-2.3
Al is the base.
According to OST 1 90048-90 the chemical composition is given for alloy B96C3 (1965). Mass fraction of each other impurity (not regulated) ≤ 0.05%, total mass fraction of other impurities ≤ 0.10%.