Alloy ВАЛ10

  • Alloy AMg6L (AL23)
  • Alloy AMg6lch (AL23-1)
  • Alloy AMg5Mz (AL28)
  • Alloy AMg5K (AL13)
  • Alloy AMg4K1.5M (AMg4K1.5M1)
  • Alloy AMg11 (AL22)
  • Alloy AMg10h (AL27-1)
  • Alloy AMg10 (AL27)
  • Alloy AM5 (AL19)
  • Alloy AM4.5Kd (VAL10)
  • Alloy AL8
  • Alloy AL7
  • Alloy AL6
  • Alloy AL4MS
  • Alloy AL4MK
  • Alloy AL4M
  • Alloy AL18 (AL18B)
  • Alloy AMg7 (AL29)
  • Alloy AMO7-3
  • Alloy AC4Mg (AL24)
  • Alloy ACRIV
  • Alloy B124
  • Alloy B2616
  • Alloy BAL10
  • Alloy VAL11
  • Alloy VAL12
  • Alloy VAL14
  • Alloy VAL16
  • Alloy VAL18
  • Alloy ŽLS
  • Alloy KS740
  • Alloy KS741
  • Alloy AK7
  • Alloy AK10M2H
  • Alloy AK10Su
  • Alloy AK12 (AL2)
  • Alloy AK12M2 (AK11M2)
  • Alloy AK12M2MgN (AL25)
  • Alloy AK12MMgN (AL30)
  • Alloy AK13
  • Alloy AK18
  • Alloy AK21M2.5H2.5 (VKZHLS-2)
  • Alloy AK5M (AL5)
  • Alloy AK5M2
  • Alloy AK5M4
  • Alloy AK5M7
  • Alloy AK5Mh (AL5-1)
  • Alloy AK6M2
  • Alloy AL21
  • Alloy AK7M2
  • Alloy AK7pch (AL9-1)
  • Alloy AK7C9 (AL11)
  • Alloy AK7h (AL9)
  • Alloy AK8L (AL34)
  • Alloy AK8M (AL32)
  • Alloy AK8M3
  • Alloy AK8M3h (VAL8)
  • Alloy AK9 (AL4V)
  • Alloy AK9M2
  • Alloy AK9pch (AL4-1)
  • Alloy AK9s
  • Alloy AK9C6 (AK9C6r)
  • Alloy AK9h (AL4)
  • Alloy AL1

    • Designation

    Name The value
    Designation GOST Cyrillic ВАЛ10
    Designation GOST Latin BAL10
    Transliteration VAL10
    By chemical elements ВAlЛ10

    Description

    Alloy ВАЛ10 used: for the production of round ingots for remelting and casting gravity die casting of details of aviation engines.

    Note

    Sealed aluminum foundry high strength heat-resistant alloy of the system Al-Cu-Mn.

    Standards

    Name Code Standards
    Non-ferrous metals, including rare, and their alloys В51 OST 1 90377-87

    Chemical composition

    Standard Mn Si Fe Cu Al Ti Zn Mg Cd
    OST 1 90377-87 0.35-0.8 ≤0.1 ≤0.1 4.5-4.9 Rest 0.15-0.35 ≤0.1 ≤0.05 0.07-0.25
    Al is the base.
    According to OST 1 90377-87 the chemical composition is given for the alloy grade VAL10. The amount of allowable impurities should be no more than 0.60. Upon agreement with the consumer, the content of copper in the alloy VAL 10 up to 5.10% is allowed. For the production of the alloy should be used aluminum grade A99.

    Mechanical properties

    Section, mm sT|s0,2, MPa σU, MPa d5, % HB, MPa
    Die casting, in the state of delivery
    ≥360 ≥500 ≥6 ≥120

    Description mechanical marks

    Name Description
    sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
    σU Limit short-term strength
    d5 Elongation after rupture
    HB Brinell hardness number

    Physical characteristics

    Temperature Е, HPa r, kg/m3
    20 72 2800

    A description of the physical symbols

    Name Description
    Е The normal elasticity modulus
    r Density
    l Coefficient of thermal conductivity
    R UD. the resistivity