Steel SHKH20SG

  • Steel 110Kh18M (110Kh18M-SHD)
  • Steel 11X18M
  • Steel 60X13S (60X13S-SHD)
  • Steel 8Х4В9Ф2 (ЭИ347; 8Х4В9МФ2)
  • Steel 8X4M4V2F1 (DI43)
  • ShKh10 steel
  • ShKh15 steel
  • ShKh15S2G3 steel
  • ShKh15SG steel
  • ShKh15SM steel (DI36)
  • ShKh20SG steel
  • ShKh4 steel

    • Designation

    Name The value
    Designation GOST Cyrillic ШХ20СГ
    Designation GOST Latin ShX20CG
    Transliteration ShH20SG
    By chemical elements -

    Description

    SHKH20SG steel is used: for the manufacture of solid-rolled rings; products, operating in environments of weak aggressiveness.

    Note

    The austenitic steel.

    Standards

    Name Code Standards
    Sheets and strips В23 GOST 103-2006
    Bars and shapes В22 GOST 2590-2006, GOST 2591-2006
    Bars and shapes В32 GOST 801-78, GOST 7417-75, GOST 14955-77, TU 14-1-801-73, TU 1-83-77-90, TU 14-11-245-88
    Blanks. Of the workpiece. Slabs В31 TU 14-1-1213-75

    Chemical composition

    Standard C S P Mn Cr Si Ni Fe Cu
    GOST 801-78 0.9-1 ≤0.02 ≤0.027 1.4-1.7 1.4-1.7 0.55-0.85 ≤0.3 Rest ≤0.25
    Fe is the basis.
    According to GOST 801-78, the total content of Ni + Cu≤ 0.50%. In steel, obtained by the method of electroslag remelting, the mass fraction of sulfur should not exceed 0.01%, and phosphorus 0.025%. When steel is smelted in acid open-hearth furnaces, the mass fraction of copper is allowed up to 0.30%, while maintaining the norm of the total share of copper and nickel is not more than 0.050%.