Steel SV-10Х19Н23Г2М5ФАТ (ЭП868)

Designation

Name The value
Designation GOST Cyrillic Св-10Х19Н23Г2М5ФАТ
Designation GOST Latin Cb-10X19H23G2M5FAT
Transliteration Sv-10H19N23G2M5FAT
By chemical elements 10Cr19Н23Mn2Mo5VNTi
Name The value
Designation GOST Cyrillic ЭП868
Designation GOST Latin EP868
Transliteration EhP868
By chemical elements -

Description

Steel SV-10Х19Н23Г2М5ФАТ used: for the production of welding wire with a diameter of 2.0 to 6.0 mm, used for welding high strength steels of various classes, including austenitic manganese steels.

Note

High-alloy stainless steel. Steel provides high stability of arc burning, spontaneous separability of the slag crust, as in the welding of pearlitic and austenitic manganese steels, low tendency to hot cracking, absence of pores and high strength properties of the weld metal.

Standards

Name Code Standards
Welding and cutting metals. Soldering, riveting В05 TU 14-1-2989-80

Chemical composition

Standard C S P Mn Cr Si Ni Fe N V Ti Mo Y
TU 14-1-2989-80 0.08-0.12 ≤0.015 ≤0.02 1.5-2.5 18-20 ≤0.4 22-24 Rest 0.2-0.35 1-1.3 0.2-0.45 4.5-5.8 ≤0.16
Fe is the basis.
According to TU 14-1-2989-80 the chemical composition is given for steel grade Sv-10Kh19N23G2M5FAT (EP868). Yttrium is introduced into the metal by calculation and chemical analysis is not determined. It is allowed to supply the metal with the actual content of titanium. The deviation of the chemical composition by nitrogen is ± 0.020%.

Mechanical properties

Section, mm σU, MPa
The welding wire supplied on the other 14-1-2989-80
2 1078-1470
2 784-1225

Description mechanical marks

Name Description
σU Limit short-term strength