Electrodes for welding of copper
Are you interested in electrodes for welding copper from a supplier — the company Electrovek-Steel? At us you will find only the checked up information on all applied versions of similar expendable materials
Buy welding electrodes for welding copper at affordable prices from the manufacturer offers the company Elektrovek-steel. The supplier guarantees the observance of the assortment of deliveries, ensures prompt delivery of the products to the customer.
Kinds of electrodes used for welding copper products
Practical applications are the following types of electrodes:
- Coal / graphite. Used for manual DC welding. Need to use filler wire, which contains copper and a certain amount of deoxidizer;
- Tungsten non-consumable electrodes. Used for welding under a layer of flux, provide the best quality of a welded joint, free of pores and oxide surface film;
- Copper electrodes, which also contain a certain amount of iron, manganese and silicon. Ensure effective deoxidation of the weld zone. With these electrodes, apart from welding, it is also possible to weld copper parts.
The choice of electrode material is determined by the scale of application of welding technologies, the thickness of the blanks to be joined and the availability of appropriate welding equipment.
Electrovek-steel company offers to buy at a cost-effective price of the manufacturer a variety of types of electrodes intended for welding copper. The supplier ensures compliance with the required product range, as well as its prompt delivery to the point marked by the customer.
Copper welding modes by specific types of electrodes
Coal or graphite electrodes are used in the welding of thin-walled products. The length of the weld zone usually does not exceed 25… 30 mm, the same are the diameters of the electrodes.
The TIG method, which requires tungsten electrodes, is used for welding copper under a flux layer. The electrodes can be up to 2.5… 3 mm in diameter. In this case, the surface of the finished structure is not exposed to atmospheric oxygen, and therefore the weld zone is of the highest quality.
Copper electrodes are the most versatile of their use, and provide a quality connection of copper parts with a thickness of up to 12… 15 mm. Can be used for argon-arc welding.
Electrovek-steel company offers to purchase at a bargain price from the manufacturer various types of electrodes intended for efficient welding of various in size and thickness of copper parts. The supplier ensures strict compliance with the nomenclature of deliveries and guarantees the minimum delivery time to the customer.