GOST 15835-2013. Rods made of beryllium bronze
The company Electrocentury-steel supplies bulk thermometers, circle, rod, wire, which are manufactured from beryllium bronze of various grades. Guaranteed the best price from the manufacturer. The supplier provides timely delivery of products to the point set by the customer.
GOST 15835−2013 stipulates the following:
- Bulk hire this group of bronze alloys can be produced by extrusion or drawing. Drawing are made with a round profile, while the extruded metal products may be square, and hexagonal cross sections;
- The range of the obtained size of the circle and the rod is in the range 5…40 mm for rolled and extruded 42…100 mm for extruded products
- Tolerances limit the deviations of the cross-sectional dimensions of make-up, 0,05…-0,34 mm for extruded products, and…-2.0 and 2.8 mm for extruded rolled (with increasing transverse size tolerance is also increased accordingly);
- The roundness of bars shall not exceed extreme deviations of the cross section;
- All types of the considered profiles are supplied in random lengths. For drawn bar it ranges from 1500 to 4000 mm, extruded — from 700 mm to 2500 mm.
To by bars or round made of beryllium bronze, which are produced according to technical requirements GOST 15835−2013, the company offers Electrocentury-steel. Rental is sold at producer prices. The supplier delivers products to the address specified by the customer.
GOST 15835−2013 provides for the production of round and rod, beryllium bronze
Brb2. The metal can be supplied in hard or soft (determined by heat treatment technology). Chemical composition beryllium bronze must meet the requirements of GOST 18175.
On the surface of finished products is not allowed such surface defects as cracks, holes, press-utiny, nonmetallic inclusions, and delamination of the alloy. After production of the finished bars and rods (except soft) are subject to edit.
Mechanical properties of the finished profile after rolling, without subsequent aging, must be within the following limits:
- The limit of temporary resistance, MPa — 440…980;
- Elongation % — 15…20;
- Brinell hardness number, HB — 100…150.
The company Electrocentury-steel offers to purchase at cost-effective prices from the manufacturer of the rod or circle from beryllium bronze Brb2, which is made to technical regulations, GOST 15835−2013. The provider ensures timely delivery of goods to the point specified by the customer.