Gost 19241-80

Characteristics

State Committee of the USSR State Standards Decree of January 4, 1980 N 33 date of entry into force is set 01.01.81 instead of GOST 19241-73. Restriction of validity was removed by the Protocol N 5-94 of the Interstate Council for Standardization, Metrology and Certification (ISO 11-12-94). Reissue. June 2011.

Topicality

This standard regulates grades of nickel and low-alloy nickel alloys processed by pressure and intended for the manufacture of semi-finished products used in electronic engineering.

Requirements

The standard fully complies with ST SEV 1257-78 and specifies the requirements for the chemical composition of nickel and low-alloy nickel alloy grades: NK0.04, HMg, NV3, NV3v, NVMg3-0.08v, NKa0.07 and NKa0.13. Compliance with the requirements of the standard of CMEA requirements of this standard is shown in the appendix.

The percentage composition of NMg GOST 19241-80

Ni+Co Fe C Si Mn S P Cu As Mg Zn Sb Bi Sn Cd
min 99.6 ≤0.07 ≤0.05 ≤0.02 ≤0.03 ≤0.005 ≤0.0010 ≤0.05 ≤0.0010 0.02 - 0.07 ≤0.005 ≤0.0010 ≤ 0.001 ≤0.001 ≤0.001

The supplier

Supplier Evek GmbH offers to buy low-alloy nickel alloys at a price most optimal in this segment of rolled products. Full compliance with GOST 19241-80. We offer low-alloy nickel rolled from the specialized warehouses of Evek GmbH with delivery in any city.

Buy, low price

Supplier offers to buy low-alloy nickel alloys, the price - due to the technological features of production without including additional costs. The website of Evek GmbH contains information about the latest arrivals of products. The price is optimal from the supplier. Timely delivery is provided by representative offices in Eastern European cities.