GOST 2170-73. Tape of nickel and low-alloy nickel alloys. Technical conditions.

Technical specifications

Ribbons must meet the requirements of GOST 2170-73 according to the technological procedure, made of НП1, НП2, НПЗ, NP4 in soft (annealed), half-hard and hard (not annealed) condition. Mild nickel tapes with the thickness of 0.15 mm and more, with the width of more than 60 mm are produced with a flawless double-sided surface brushing by steel brushes.

Quality

According to GOST 2170-73 the tapes surface must be clean, free of dirt, and smooth, without films, cracks, bubbles, delaminations, scale, shells, dents, scratches and rolls. Local risks, dents, roll impressions are allowed on the surface, which do not lead out of the belt during control stripping over half of the thickness limit deviations. Traces of unburned grease, discoloration and local darkening on the surface of strips intended for the manufacture of components for electric vacuum and semiconductor devices are not allowed. Local light spots and stripes on stripped surface are allowed.

Strength characteristics. GOST 2170-73

State of material Tensile strength σb, MPa (kgf/mm2), not less, grades Elongation at break, %, no less, grades
NP1; NP2; NP3; NP4 NP1; NP2; NP3; NP4
δ10 δ5
Soft 390 (40) 32 35
Semi-solid 440 (45) 10 12
Hard 540 (55) 2 3

The supplier

The supplier Evek GmbH offers to buy nickel and low-alloy strip for the most optimal price in the given segment of rolled products. We offer to buy nickel and low-alloy strip from specialized warehouses of Evek GmbH with delivery in any city. Full compliance with GOST 2170-73.

Buy, best price

Supplier Evek GmbH offers to buy nickel and low-alloy tapes, price - due to technological features of production without including additional costs. On the website of supplier Evek GmbH information about the latest arrivals of products. We have the best price-quality ratio. We supply nickel and low-alloy strip, the price - the best from the supplier.