Cold welding of bronze
Are you interested in the cold welding of bronze from Electrovek-Steel? At us you will find only the qualitative information on the given process and can order the necessary consumables
Buy technological compounds that provide quality cold welding of products from bronze alloys, offers the company Electrovek-steel. Products are sold at an economical price from the manufacturer. The supplier carries out the necessary information support, makes operative delivery of production to the point established by the customer.
Technology of cold welding of bronze alloys
Cold bronze welding is used in the absence of the opportunity to use other technologies for the unbroken joining of bronze products. Most often the process is used when connecting pipes and fittings in hard-to-reach places, as well as local damage to parts. The humidity of the surface does not matter at this time. The limitation of this method is that it can not be used at significant internal pressures, and loads on the joints.
Cold bronze welding is performed in the following sequence:
- The working substance, which is in a pasty state, is kneaded to a homogeneous mass, and applied to the joined ends of the bronze parts;
- Products are tightly pressed against each other, and are left in this position for at least 15… 20 min;
- If it is necessary to use cold welding of bronze in conditions of low ambient air temperatures, the working composition should be heated in the hand or with a hair dryer;
- After the connection, the surplus of the working substance is removed from the surface to be welded using wet wipes made of cloth.
Electrovek-steel company offers certified compounds for cold welding of bronze alloys. Products are sold at the manufacturer’s price. The supplier ensures the timely delivery of components to the point marked by the customer.
Composition of substances for cold welding of bronze and safety
To install welded welded elements described above, a pre-exposure of at least 1.5 hours is required before the hardeners fully cure. The prepared composition should be used within no more than 7 minutes. Components of cold welding contain, in addition to fine particles of bronze alloys, epoxy materials, so the skin of the face and hands should be thoroughly rinsed with warm water after soaking with soap.
The components have a limited (no more than 24 months from the date of issue) warranty period. Their storage at a temperature above + 30… + 35 0 C is not recommended.
Technology and working compounds intended for cold welding of bronze are offered by Electrovek-Steel. Products are sold at an economically advantageous price of the manufacturer. The supplier provides prompt delivery of materials to the point designated by the consumer.Tavschik guarantees prompt delivery of equipment to the point set by the customer.