History has been bombarded. Physical and mechanical properties.
To buy at cost-effective prices alloys of aluminum with magnesium and manganese — Magnolia — the company offers Electrocentury-steel. Supplier arranged timely delivery of products to the address specified by the customer.
General characteristics Magdala
Alloys Al-Mn and Al-Mg. occupy a leading position among aluminum alloys, neopoznannyh in the process of obtaining and subsequent processing. Manganese and magnesium, are characterized by their limited solubility in aluminum, which is further reduced with decreasing temperature of these alloys. However, the effect of hardening during heat treatment is small. For manganese this is because in the process of incipient crystallization of alloys containing up to 1.9% of Mn, the formation of insoluble aluminum intermetallic compounds. As a result, the alloy remains heterogeneous (solid solution and intermetallic particles), which makes the quenching and subsequent aging is impossible.
For aluminium alloys with a magnesium hardening does not occur for the reason that the magnesium is completely dissolved in aluminum even at room temperatures, eliminating the formation of any excess phases.
Despite the lack of effect of hardening magnalia widely used in practice. While its low density, they increase the strength and corrosion resistance of the alloys. The magnesium content must not exceed 3%, and manganese — 6%.
To purchase various brands of Magdala at prices from the manufacturer, the company offers Electrocentury-steel. Supplier guaranteed timely delivery of products to any destination set by the client.
Mechanical properties of the considered alloys
For the most common brands and they are listed below:
- For Amg2 alloy yield strength, MPa — 165 314…, plastic limit, MPa — 135…215, elongation % — 18…3;
- For the Amg3 alloy yield strength, MPa — 135…245, plastic limit, MPa — 60 of 195…, elongation % — 15…6;
- For AMg5 alloy yield strength, MPa — 255…275, plastic limit, MPa — 125…155, elongation % — 15…12;
- For AMg6 alloy yield strength, MPa — 275…315, plastic limit, MPa — 125…155, elongation % — 15…4.
The company Electrocentury-steel offers to buy at affordable prices from the alloys of aluminum with magnesium and manganese. The supplier provides timely delivery of the products to the address specified by the consumer.