Ost1 90266-86. The large-sized rolled bars from titanium alloys. Specifications.
1.1. Depending on purpose bars are subdivided:
- for the fabrication of parts by machining (symbol — M1);
- subsequent hot processing by pressure (without a symbol).
2.1. Nominal range
3. Technical requirements
3.1.Production is governed by the requirements of normative-technical documentation.
3.2. The bars are made of alloys VT1−00, VT1−0, VT1−2,0T4, 0T4−0,0T4−1, VPP-1, VT5, VT5−1, VT6, VT6S, VT8, VT9, VT14, VT20, VT22, BT23].
3.3. The chemical composition of the material shall conform to the requirements 0CT1 90013−81.
3.4. Titan range comes in hot-rolled condition without heat treatment.
3.5. The indicator of surface roughness is RZ supplied after machining must be no more than 80 microns.
3.6. On the surface after machining is not permitted ledges from the cutter, chernavina and other surface defects.
3.9. Value macronema on a 10-point scale should be no higher than:
a) bars for machining:
- 7 points with a diameter up to 100 mm;
- 8 points at the diameter over 100 mm
- 8 points for diameters up to 100 mm;
- 9 points at the diameter over 100 mm
- 1−7 type dewatering of the scale — the grades BT3−1, BT6, VT6S, VT8, VT9, BT23], VT14, VT20;
- 1−6 type dewatering of the scale — the grades 0T4,0T4−1, 0T4−0, BT5, BT5−1;
- 1−7 type dewatering scale — alloy brand W 22.
Offer to buy rolled titanium rod with large specialist stores supplier Evek GmbH with delivery to any city. Full compliance Ost1 90173−75. Supplier Evek GmbH offers to buy rolled titanium rod large, the price is optimal in this segment of the rental.
To buy, best price
We offer rolled titanium rod large, the price is determined by the technological features of production without the inclusion of additional costs. On the website of the supplier Evek GmbH has placed information about the latest product arrivals. We can buy rolled titanium rod large, the best ratio price-quality. Supplier Evek GmbH offers products for the price — optimal from the supplier.