Density, hardness and specific heat capacity of tantalum and tantalum alloys

Are you interested in density, hardness and specific heat capacity of tantalum? We offer to buy tantalum from specialized warehouses of the supplier Evek GmbH with delivery to any city. Full compliance with modern quality standards. Supplier Evek GmbH offers to buy rare-earth metals, the price is optimal in this segment of rolled metal products.

Physical properties of tantalum

  • Atomic weight 180.95;
  • Density 16600 kg/m3;
  • Melting point 3290 °C;
  • Boiling point 6100 °C;
  • Coefficient of thermal expansion (at 20°C) 6.5 x 10 -6 /°C
  • Electrical resistance (at 20°C) 13.5 μOhm
  • Thermal conductivity 0.13 cal/cm2 /cm2 /°C

Mechanical properties of tantalum

  1. Tensile strength 285 MPa annealed
  2. Yield strength 170 MPa
  3. 30 % relative elongation
  4. Relative narrowing of cross-sectional area 80%.
  5. Hardness after annealing - 90 HV, after deformation - up to 210 HV.
  6. Poisson's ratio 0.35
  7. Elastic modulus/Yung: 186 GPa
  8. Recrystallization temperature (at heat treatment) 900...1200°C
  9. The hardening strength (when deformed in the cold state) is up to 650 MPa.

Evek GmbH offers to buy any rare-earth metals at producer price. The supplier guarantees product delivery to any destination.

Technical tantalum

Technical tantalum contains about 97% Ta and up to 2.5% tungsten. Such metal is used where high corrosion resistance and deformability (including at low temperatures) are important. The alloy is also higher in strength than chemically pure tantalum while retaining good machinability characteristics.

Alloy of tantalum and tungsten

This alloy, containing 90% Ta and 10% W/, is used in high-temperature devices and assemblies where increased corrosion resistance is required. The tensile strength is doubled compared to pure tantalum.

Applications

Electronics manufacturing, mainly capacitors. Tantalum is difficult to replace in cellular phones, personal computers and automotive electronics. The metal is part of the materials for the manufacture of carbide tools, metal cutting tools, as well as the production of parts for jet engines.

Buy, bargain price

Are you interested in the density, hardness and specific heat of tantalum? We offer to buy tantalum, the price - determined by the technological features of production without including additional costs. The website of Evek GmbH displays information on the latest arrivals of products. It is possible to order rolled products of any metal. We invite to partner cooperation.