Density, specific heat, melting point of babbitt

Are you interested in density, specific heat capacity, melting point of babbitt? The supplier Evek GmbH offers to buy babbitt at an affordable price in a wide range of products. We provide delivery of products to any point on the continent. The price is optimal.

Consumer characteristics of babbitts and their application

Tin and babbitts are subject to the following state standards:

  • Tin - GOST 860-75;
  • Tin and lead babbitts - GOST 1320-74.

Areas of rational use

  • B-16 is used in motor-axle bearings of electric locomotives, track machines and in other equipment which suffers heavy loads;
  • B-83,88 is used in bearings that operate at high speeds and medium loads, as well as in turbine bearings, crosshead, crank bearings and frame bearings of diesel engines, and crest shafts at low angular velocities.
Mark Delivery form Weight, kg Area of usage
VHF 000 Rod 0,22-0,28 Semiconductor technique
O1pc Chug Block 22-26900-1200 Production of canning tin and preparation of chemical reagents
О1 Chump Block 22-26900-1200 For tinplate production, manufacture of rods, tape, and other items for electrical purposes and alloy and solder manufacture
О2 Chug Block 22-26 900-1200 For preparation of babbitts, alloys, solders, tin powder, manufacture of various articles, foil, tinning of kitchenware
О3 Ingots 24-26 Saleering
О4 Stock 24-26 Production of solders, babbitts and alloys, gray iron modification

Supplier Evek GmbH offers to buy non-ferrous metals of domestic and foreign production at an affordable price in a wide range. Provide product delivery anywhere in the continent. The price is optimal.

Chemical composition of babbitts

Tin grade Fe Al S Cu As Pb Zn Sb Bi Sn Impurities
O1pch up to 0.009 - up to 0.01 up to 0.01 up to 0.01 to 0.025 - up to 0.015 up to 0.01 min 99.915 0.085 in total
О1 to 0.009 - to 0.01 0.03 - 0.01 up to 0.01 up to 0.04 - up to 0.015 up to 0.015 min 99.9 only 0.1
О2 to 0.02 - up to 0.02 up to 0.03 up to 0.015 up to 0.25 - up to 0.05 up to 0.05 min 99.565 total 0.435
О3 to 0.02 - up to 0.02 up to 0.1 up to 0.03 to 1 - up to 0.3 up to 0.06 min 98.49 total 1.51
О4 to 0.02 - to 0.02 up to 0.1 up to 0.05 to 3 - up to 0.3 up to 0.1 min 96.43 total 3.51
Б16 up to 0.1 to 0.01 - 1.5 - 2 up to 0.3 63.34 - 68.5 up to 0.15 15 - 17 up to 0.1 15 - 17 -
Б83 up to 0.1 to 0.005 - 5.5 - 6.5 up to 0.05 up to 0.35 up to 0.004 10 - 12 up to 0.05 80.941 - 84.5 -

Mechanical properties

Mark
tin
Grades-
grade
σB, MPa σT, MPa δ5 %
О1пч Cast alloy 19-21 45-60
О1 19-21 45-60
Б16 147 86
Б83 110-120 80-85

Physical properties

Mark
tin
°С E 10-5,
MPa
α106
1/Grad
Ρ,
kg/m3
O1pc 20 0,55 7300
100 2.3
О1 20 0,55 7300
100 0.23
Б16 20 9290
Б83 20 7380

Casting and technological properties of tin

  • O1pch grade - melting point 231.9 °C;
  • Grade B16 - melting point 410 °C;
  • Grade B83 - melting temperature 370 °C.

Buy. Supplier, price.

Are you interested in the density, specific heat, melting temperature of babbitt? The supplier Evek GmbH offers to buy babbitt at producer price. We provide delivery of products anywhere in the continent. The price is optimal. We invite to partner cooperation.