Table - calculation of the weight of sheet, strip, foil rhenium. The size and thickness of sheet, strip, foil rhenium.
Are you interested in the weight per meter of sheet metal, the rhenium from the vendor — company Electrocentury-steel? Here you will find the most comprehensive information on this topic
Buy sheet metal rhenium sheet, strip, foil according to prices from the manufacturer offers the supplier company Electrocentury-steel. Guaranteed timely delivery of products to the address specified by the customer.
The types of sheet metal rhenium
Rhenium strip is uniquely obtained by sintering the granulated concentrate of rhenium in the presence of ammonium perrhenate. Rhenium strip is produced in two grades of purity of 99.99% and 99.9%, it can be adapted to any technical requirements of the customer. Rhenium strip used in the manufacture of hard alloys based on Nickel, which are subsequently used in the manufacture of turbine components in jet engines and reactors chemical vapor deposition elements from the vapor phase.
Rhenium sheet and foil are often made not only of pure rhenium and rhenium alloy with molybdenum. The leaves are used as a refractory material that can withstand the extreme temperatures of processing and heat.
Sheet tungsten-rhenium 0.1 mm ВР27-VP has properties such as:
-ability to maintain hardness even at high temperatures;
the smallest of the metals coefficient of thermal expansion;
-good thermal conductivity;
-maximum resistance to differences of temperatures;
-high modulus of elasticity;
-resistance to corrosion;
-inertness towards alkali, acids.
Sheet tungsten-rhenium 0.1 mm ВР27-VP is used in conditions of high and extremely high temperatures in a snap for high-temperature furnaces (heat screens, supports and other fastening elements).
Buy sheet metal of rhenium and its alloys, the company offers Electrocentury-steel. The provider sells its products at affordable prices and ensures timely delivery to the client.
How to determine the weight per meter of sheet metal of rhenium
The sheet or foil made of rhenium or an alloy with tungsten present a parallelepiped of finite size. Thus, to calculate the mass of sheet or foil, you must use the relationship:
M = PV where ρ is the density of the rhenium (20800 kg/m3), V is the volume of the sheet (lengthxwidthxthickness) mm3.
To buy affordable flats of rhenium or its alloys, the company offers Electrocentury-steel. The supplier ensures prompt delivery of goods to the point specified by the client.