LMS.021.016-77 ТУ11. Tantalum tape. T
To buy tantalum tape, which is produced in accordance with SU0.021.016−77 TU 11 at affordable prices from the manufacturer offers the company Elektrovek-steel. The supplier guarantees the prompt delivery of products to any address specified by the consumer.
Properties and features of production of tantalum tape
Tantalum tape is usually used as a strong and at the same time lightweight outer coating. In addition, the tapes can serve as adhesives that connect the two objects together. SU0.021.016−77 TU 11 provides for several brands of tantalum tape:
- For military purposes;
- For food packaging;
- For agricultural products;
- For pharmaceutics.
Most of the sizes of tantalum tapes are made from cast ingots for use in coatings and thin film deposition processes from vapor deposition and physical vapor deposition, including evaporation by thermal and electron beam, low-temperature organic evaporation, and deposition of the atomic layer.
Organometallic and chemical vapor deposition is used for specific applications, such as fuel cells and solar energy. Tantalum tape is usually a thin, thin sheet metal tantalum strips. The thickness can vary from 0.5 to 2 mm for all types of tantalum alloys.
Maximum length of tantalum tape is 30 mm; It can be obtained with a nominal thickness of about 0.005 to 0.020 μm for applying a thin film to glass or metal substrates.
The materials are obtained using crystallization processes, solid state and other ultra-high purification processes, such as sublimation.
Tantalum tape is used as a protective coating on a wide variety of materials. The tape is also used in various packages.
To buy the tantalum tape produced according to the technical requirements of SUO.021.016−77 TU 11, the company offers Electrovek-steel. Products are sold at economically favorable prices from the manufacturer. The supplier guarantees the prompt delivery of products to any point set by the customer.
Assortment and delivery conditions
|Thickness, mm||Width, mm||Length, mm|
|Tape||0.150 — 0.3||40 — 120||> 1500|
|Plate||4.0 — 10.0||100 — 400||400 — 600|
|40.0 — 75.0||150 — 200||400 — 600|
Tantalum tape is manufactured with minus tolerances in the thickness of 0.01… 0.1 mm. The length of the tape is determined by agreement with the customer, and can reach several hundred meters. On the surface of the tape is not allowed scratches, roughness, visible traces of welding. According to ISO 021.016−77 TU 11, the delivery of tantalum tape is carried out in the unannealed state.
To buy tantalum tape, which is produced according to the norms of SUO.021.016−77 TU 11, the company offers Electrovek-steel. Effective prices are from manufacturers. The supplier ensures the timely delivery of products to any point specified by the consumer.