THAT 95.166-83. Zirconium hire brands E110, E110, Э125
Are you interested in TU 95.46−83 for zirconium rolled products from a supplier — the company Electrovek-Steel? At us you will find only the checked up information on the given subject
Buy zirconium rolled E110, E125 at affordable prices from the manufacturer offers the company Elektrovek-steel. The supplier guarantees the timely delivery of products to any point set by the customer.
Sheet rolling of zirconium is made from initial blanks of high chemical purity with an allowable inclusion of about 2.5 percent of niobium. They are produced by the method of cold rolling followed by vacuum annealing. Annealing is required for subsequent etching of the surface. As a result, zirconium rolled sheet acquires an increased corrosion resistance. The zirconium sheet according to TU 95.46−83 is produced with a thickness of 1.5 and 2.0 mm, with a sheet width of 250 and 418 mm. The sheet is produced measuring 3,000 mm length. By agreement with the consumer, the zirconium sheet can be produced in other sizes. Supply of sheet metal is made with cut edges. Tolerances for flatness and crescentness of the finished sheet should not exceed 5 mm along the entire length of the rolled billet.
Sheet parts of zirconium are used in the manufacture of nuclear reactor shells (in particular, fuel rods). Zirconium sheet metal is also used in the chemical industry for the production of special containers (cassettes, vessels, etc.).
Due to its susceptibility to open flame, the finished zirconium is carefully and hermetically packed. Corrugated cardboard sheets of metal after straightening and cleaning are stacked, which are then placed in a container for subsequent transportation. The labeling of the sheet is obligatory: the designation and brand of the profile, the details of the party’s fusion, the dimensions and the weight of the sheet are put on the rental. When storing zirconium rolled products, the possibility of contacting blanks with chemically aggressive media should be excluded.
Buy zirconium cold-rolled sheet of grades E110 or E125 at the prices of the manufacturer offers the company Elektrovek-steel. The supplier guarantees timely delivery of products to the address specified by the customer.
The parameters of cold rolled zirconium rolled products are presented in the table:
End of form
End of form
To buy cold-rolled zirconium rolling at the price from the manufacturer offers company Electrovek-steel. The Supplier organizes an immediate delivery of the metal to any point specified by the customer.