State standard for roll steel

Are you interested in the GOST standards for roll steel? Supplier Evek GmbH offers to buy roll steel in any quantity at an affordable price in a wide range. We provide delivery of products to any point on the continent. The price is optimal.

GOST 5950-2000

Rolled steels are a special group of tool steels, which are produced by domestic steel mills in accordance with the technical standards and requirements of GOST 5950-2000.

Percentage composition of roll steels

Steel grade Mass fraction of element, %
carbon silicon manganese chromium tungsten vanadium molybdenum nickel
Group I
8CRF 0,70-0,80 0,10-0,40 0,15-0,45 0,40-0,70 - 0,15-0,30 - -
9CRPH. 0,80-0,90 0,10-0,40 0,30-0,60 0,40-0,70 - 0,15-0,30 - -
9CRFM 0,80-0,90 0,10-0,40 0,30-0,60 0,40-0,70 - 0,15-0,30 0,15-0,25 -
9X1 0,80-0,95 0,25-0,45 0,15-0,45 1,40-1,70 - - - -
12X1 1,15-1,25 0,10-0,40 0,30-0,60 1,30-1,65 - - - -
9G2F 0,85-0,95 0,10-0,40 1,70-2,20 - - 0,10-0,30 - -
6CVG 0,55-0,70 0,10-0,40 0,90-1,20 0,50-0,80 0,50-0,80 - - -
B2F 1,05-1,22 0,10-0,40 0,15-0,45 0,20-0,40 1,60-2,00 0,15-0,30 - -
CGS 0,95-1,05 0,40-0,70 0,85-1,25 1,30-1,65 - - - -
6ХВ2С 0,55-0,65 0,50-0,80 0,15-0,45 1,00-1,30 2,20-2,70 - - -
7ХГ2ВМФ 0,68-0,76 0,10-0,40 1,80-2,30 1,50-1,80 0,55-0,90 0,10-0,25 0,50-0,80 -
9X5VF 0,85-1,00 0,10-0,40 0,15-0,45 4,50-5,50 0,80-1,20 0,15-0,30 - -
Group II
55CRNIM 0,50-0,60 0,10-0,40 0,50-0,80 0,50-0,80 - - 0,15-0,30 1,40-1,80
55CRNIV 0,50-0,60 0,10-0,40 0,50-0,80 0,50-0,80 0,40-0,70 - - 1,40-1,80
7X3 0,65-0,75 0,10-0,40 0,15-0,45 3,20-3,80 - -
8X3 0,75-0,85 0,10-0,40 0,15-0,45 3,20-3,80 - - - -
5CR2MNF 0,46-0,53 0,10-0,40 0,40-0,70 1,50-2,00 - 0,30-0,50 0,80-1,10 1,20-1,60
5CHZVZMFS 0,45-0,52 0,50-0,80 0,20-0,50 2,50-3,20 11,50-13,50 1,50-1,80 0,80-1,10 Niobium
Note - In the designation of grades, the first digits indicate the mass fraction of carbon in tenths of a percent. They may be omitted when the mass fraction of carbon is close to or greater than one. The letters mean: D for manganese, C for silicon, X for chromium, B for tungsten, F for vanadium, H for nickel, M for molybdenum, E for copper, T for titanium. Numbers after the letters mean the average mass fraction of the corresponding alloying element in whole units of percent. The absence of a digit means that the mass fraction of that alloying element is about 1%. In some cases the mass fraction of these alloying elements is not stated if it does not exceed 1.8%.

The mass fraction of sulfur and phosphorus in the steel must not exceed 0, 030% (of each element). Other grades of roll steels are made on individual orders. Evek GmbH offers to buy roll steel at an affordable price in a wide range. We provide delivery of products anywhere in the continent. The price is optimal.

Mechanical Properties

GOST 5950-2000 establishes the following normative values for these steels. The hardness of roll steels in the state of delivery:

Steel grade Hardness HB, not more

Impression diameter, mm,

not less

Steel grade Hardness HB, no more

Impression diameter, mm,

not less

8XF 241 3,9 8Х4В2МФС2 255 3,8
9KHF 241 3,9 11Х4В2МФЗС2 255 3,8
9X1 229 4,0 X12MF 255 3,8
6HS 229 4,0 X12VMF 255 3,8
9G2F 229 4,0 5CRNIM 241 3,9
6CHEVG 217 4,1 5CNVS 255 3,8
B2F 229 4,0 8X3 241 3,9
4XC 217 4,1 5CR2MNF 255 3,8
KVCGF 241 3,9 4XVMF 241 3,9
6XV2C 255 3,8 4CR5MOFS 241 3,9
9CR5VF 241 3,9 4Х2В5МФ 241 3,9
8CR6NFT 241 3,9 5KHZVZMFS 241 3,9

Hardness after heat treatment:

Steel grade Temperature, °С, and sample hardening environment Tempering temperature, °C HRC3 (HRC) hardness, not less

8XF

11XF

X

9X1

9G2F

9XVG

9ÕÑ

B2F

ХГС

KHVSGF

5XV2SF

5CRNIM

5Х2МНФ

4CR5MOFS

4Х4VMFS

4Х5МФ1С

5ХЗВЗМФС

820-840, oil

810-830, oil

830-850, oil

820-850, oil

780-800, oil

820-840, oil

840-860, oil

820-840, water

820-860, oil

840-860, oil

900-920, oil

840-860, oil

960-980, oil

1010-1030, oil

1050-1070 oil

1020-1040 oil

1120-1140, oil

180

-

180

-

180

-

-

180

-

180

180

550

550

550

550

550

550

58 (57)

63 (62)

60 (59)

63 (62)

60 (59)

63 (62)

63 (62)

60 (59)

63 (62)

61 (60)

61 (60)

36 (35)

46 (45)

48 (47)

50 (49)

48 (47)

50 (49)

Buy. Supplier, price.

Are you interested in the GOST standards for roll steel? Supplier Evek GmbH offers to buy roller steel in any quantity at manufacturer's price. We provide delivery of products anywhere in the continent. The price is optimal. We invite you to partner cooperation.