Water pressure metal cutting
To buy technology and equipment for the implementation of the technology of cutting metal or alloy by a high-pressure water jet is offered by Electrovek-Steel. Products are sold at an affordable price from the manufacturer. The supplier provides prompt delivery of the whole complex of technological equipment to the address specified by the customer.
The essence of the process of cutting metals with water
If the dynamic flow of water (at a pressure in excess of 20… 30 at) is accelerated in a gradually tapering channel to velocities of 800… 900 m / min, it is possible to obtain the energy characteristics of the water jet, sufficient to perform precise cutting of sheet products from tin, aluminum And other metals and alloys with increased ductility.
The technology of metal cutting with ultra-high pressure water has the following operational advantages:
- There are no structural changes in the preform metal;
- The cut sheet is not deformed;
- The process of cutting is not accompanied by the release of environmentally harmful products — dust, microparticles, suspensions, etc .;
- The tool (nozzle) does not need to be periodically adjusted or refilled;
- There are no restrictions on the configuration of the cut contour of the workpiece;
- Metal waste is insignificant, since the width of the cut zone does not exceed 0.5… 1.0 mm (it is ensured due to extremely small — no more than 0.1 mm — diameter of the nozzle outlet).
Electrovek-steel company sells technology and equipment for cutting sheet metal and high-pressure jet alloys at a competitive price. The supplier provides constant information support, ensures timely delivery of products to the point set by the client.
A set of modern installations for hydrodynamic cutting of metals by high-pressure jet includes:
- Drive unit;
- 3-D coordinate table for workpieces;
- The mechanism of moving the working head;
- Set of replaceable injectors;
- Pumping station;
- Capacity for collecting water;
- Cleaning filters.
The control of the operation of the equipment is made by an operationally adjustable CNC system.
Buy technology and equipment for cutting plastic metals and alloys with high-pressure water offers the company Elektrovek-steel. Economically favorable prices of the manufacturer. The supplier guarantees timely delivery of products to the point set by the customer.