Vendor

The supplier Evek GmbH offers to buy a wire, a circle 95X18, ei229, the price - optimal in this segment of rolled products. Full compliance with international quality standards. We offer to buy wire, round 95X18, ei229 from specialized warehouses of the supplier Evek GmbH with delivery in any city.

Technical characteristics

Stainless steel corrosion-resistant ordinary, smelted in open electric arc and induction furnaces or in vacuum induction furnaces followed by vacuum arc remelting.

Percent composition (GOST 5632-72)

Fe	С	Si	Mn	Ni	P	S	Cr	Cu	Ti
basis	0.9 - 1	≤0,8	≤0,8	≤0,6	≤0,03	≤0,025	17 - 19	≤0,3	≤0,2

Steel hardness HB 10 ^-1 = 269 MPa.

Mechanical properties (temperature 20°C).

Range	s in	sT	d5	y	Heat treatment
-	MPa	MPa	%	%	-
Bar	770	420	15	30	Annealed at 885 - 920 °C, 1 - 2 hours

_Sb - Short-Term Strength Limit

_sT - Proportional limit (yield strength for permanent deformation)

_d5 - Tensile elongation at break.

Cold working

Turning, milling, grinding, drilling.

Thermal machining

Normalization, hardening, annealing, tempering.

Application

Production of bushings, axles, bearings, parts with high hardness and wear resistance requirements, operating at temperatures up to 500 °C or exposed to moderately aggressive environments.

Analogues

Germany	EU	Poland	USA	France	Czech Republic	Japan
DIN, WNr	EN	PN	AISI	AFNOR	CSN	JIS
1.4125	X102CrMo17	H18	440B	X105CrMo17	17042	SUS440C
X102CrMo17			440C	Z100CD17
X105CrMo17			440FSe
			A756

Buy, bargain price

We offer a wire, round 95X18, ei229, the price is determined by production costs without the inclusion of additional costs. On the site of the company displays information about the latest arrivals of products. It is possible to order the products of non-standard parameters. We have the best price-quality ratio for the entire range of products. In the stainless steel segment Evek GmbH is a profitable supplier. Timely delivery is ensured by representative offices in Eastern European cities.