Sheet, Nitronic 60® tape - Alloy 218
Percentage composition
| Ni | Ti |
Cr | Mn | Mo | C | Si | Al | P | S | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|
| 62-69 | 1.5-3 | 20-22 | ≤4 | ≤2,25 | ≤0,15 | ≤1 | ≤1.25 | ≤0,02 | ≤0,015 | ≤0,5 |
Smelted in an open arc furnace. High strength of semi-finished products is achieved by cold working.
Supplier
We offer to buy sheets, strips Nitronic 60® - alloy 218 from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. The supplier Evek GmbH offers to buy sheet, tape nitronic 60® - alloy 218 at the best price.
Technical features
Highly alloyed austenitic nickel based steel (Ni 62-69%), alloyed with titanium, chromium, manganese, molybdenum Demonstrates high resistance to oxidation and chemical corrosion. It is used for low resistance resistors and heated wires.
Machining
Turning, milling, grinding, drilling. Good for welding.
Mechanical properties
| Designation | Description | MPa |
|---|---|---|
| s in | Ultimate short-term strength | 530 MPa |
| sT | Yield strength (0.2% deviation) | 360 MPa |
| d5 | Relative elongation. | 34% |
Application
Automotive valves, brackets, fasteners, including those used in shipbuilding, electrical welding parts. The rod is used for welding pipe, Monel® 400, R-405 and K-500 steel grades. Ribbons, for example, are used for heating bimetals. The maximum working temperature in the air is 300 ° C.
Buy, bargain price.
We offer sheet, tape 60® - alloy 218, the price - due to technological features of production without the inclusion of additional costs. On the website of the company displays information on the latest arrivals of products. It is possible to order rolled steel of non-standard parameters. We have the best price-quality ratio for the entire range of products. In the segment of chrome-nickel steel, Evek GmbH is a profitable supplier.