Sheet, strip 4x5mf1s - X40CrMoV5-1 - 1.2344
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 4X5MF1S | EP572 | 1.2344 | X40CrMoV5-1 | Delivery from the stock, in stock |
Buy instrumental alloyed steel 4X5MF1S and X40CrMoV5-1 (1.2344) at an economical price from the manufacturer offers the company Evek GmbH. The supplier provides strict compliance with the range of supply of sheet metal, guarantees its rapid delivery to the address specified by the customer.
Chemical composition
Tool alloyed steel of 4X5MF1S grade is designed for production of working parts of dies for hot deformation of metals and alloys. In the CIS countries it is produced according to the technical requirements
| Element | C | Si | Mn | Cr | Mo | V |
|---|---|---|---|---|---|---|
| Percentage content in steel | 0,37...0,44 | 0,80...1,20 | 0,15...0,40 | 4,50...5,50 | 1,20...1,50 | 0,30...0,60 |
GOST limits the percentage of metallurgical impurities in steel - phosphorus and sulfur: they must not be more than 0.025%. The steel can also be produced under the name EP 572.
The nearest foreign analogue is tool steel X40CrMoV5-1 (1.2344). It is produced according to norms of standards DIN 17350, ISO 4957 and has the following chemical composition:
| Element | C | Si | Mn | Cr | Mo | V | Ni, Cu |
|---|---|---|---|---|---|---|---|
| Percentage steel content | 0,37...0,44 | 0,90...1,20 | 0.20...0,50 | 4,50...5,50 | 1,20...1,50 | 0,80...1,10 | 0.80, 1.10 Maximum 0.30 |
Steel X40CrMoV5-1 (1.2344) can have up to 0.035% sulfur and phosphorus.
Company Evek GmbH offers to buy at economically advantageous price of the manufacturer rolled sheets (sheets, strips) of tool stamped steel grades 4Х5МФ1С, X40CrMoV5-1 (1.2344). Supplier ensures compliance of rolled products range of supply, its timely delivery directly to the consumer is guaranteed.
Properties and application
Steels of these grades belong to the group of steels for hot deformation, and are distinguished by increased heat resistance and toughness indicators. Stamping tools are made of them, exploitation of which is carried out under conditions of sharp cyclic temperature changes - up to 600 ... 6200 С. Steels of the brands 4Х5МФ1С and X40CrMoV5-1 (1.2344) are used particularly for the production of hot forging tools KGSHP and GKM, hammer stamps, die-casting press tools for non-ferrous metals and steels with increased ductility.
After quenching and tempering at optimum temperatures the steels have the following physical and mechanical characteristics:
- Tensile strength - 1670 MPa;
- Yield strength - 1470 MPa;
- Elongation range - 10%;
- Relative narrowing - 40%;
- Impact toughness - 390 kJ/m2;
- Hardness - 52...55;
- Heat resistance - 6300 C.
Buy from the manufacturer price sheet, strip, made of steel grades 4X5MF1S and X40CrMoV5-1 (1.2344) offers the company Evek GmbH. The supplier ensures compliance with the product range, as well as its timely delivery to the customer.