Aluminium A0

Designation

Name The value
Designation GOST Cyrillic А0
Designation GOST Latin A0
Transliteration A0
By chemical elements -

Description

Aluminium A0 is used: for the production of pigs, ingots, wire rod, strips, flat ingots, cast by semi-continuous method or continuous casting, and is intended for rolling into sheets, strips and other semi-finished products; heat exchangers evaporators and condensers with two-sided bulge of the channel used in domestic refrigerators and freezers; roll foil used for thermal, hydro and sound insulation; cold-rolled foil intended for packaging of food, drugs, medical devices, cosmetic products industry, as well as for the production of packaging materials based on it.

Note

Aluminium technical purity.
Aluminum grade of A0 corresponds to the chemical composition of the marches of aluminium EN AW-1100, installed in the European standard EN 573−3-94 and Marche 1100, registered by the American aluminum Association.

Standards

Name Code Standards
Tape В54 GOST 13726-97, OST 4.021.076-92, TU 1-2-432-82
Sheets and strips В53 GOST 618-73, GOST 17232-99, GOST 21631-76, GOST 25001-81, GOST 745-2003, OST 4.021.047-92
Bars and shapes В52 GOST 8617-81, GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92
Non-ferrous metals, including rare, and their alloys В51 GOST 9498-79, GOST 11069-2001, GOST 11070-74, GOST 19437-81, OST 4.021.009-92

Chemical composition

Standard Mn Cu Al Ti Zn Mg
GOST 19437-81 ≤0.05 ≤0.05 ≥99 ≤0.02 ≤0.1 ≤0.05
Al is the base.
According to GOST 19437-81 and GOST 11069-2001, the total content of Si + Fe ≤ 0.95%. The content of other impurities (each separately) ≤ 0.030%. The total content of all impurities is ≤ 1.00%.

Mechanical properties

Section, mm σU, MPa d5, % d
The tape is able to supply for OST 4.021.076-92 (samples transverse)
0.25-0.5 ≥60 - ≥20
0.5-0.9 ≥60 - ≥25
0.9-2 ≥60 - ≥28
0.25-0.8 ≥145 - ≥3
1-2 ≥145 - ≥4
Sheet metal in delivery condition according to GOST 21631-76, OST 4.021.047-92 tape according to GOST 13726-97 (samples transverse)
5-10.5 ≥70 - ≥15
0.3-0.5 ≥60 - ≥20
0.5-0.9 ≥60 - ≥25
0.9-10.5 ≥60 - ≥30
0.3-0.8 ≥145 - ≥3
0.8-3.5 ≥145 - ≥4
3.5-10.5 ≥130 - ≥5
0.8-4.5 ≥100 - ≥6
Sheet metal as supplied at OST 4.021.047-92 (samples transverse)
0.5-0.8 ≥60 - ≥25
1-10 ≥60 - ≥30
0.5-0.8 ≥145 - ≥3
0.8-3.5 ≥145 - ≥4
3.5-10 ≥130 - ≥5
Plates according to GOST 17232-99. 4.021.061-92 supplied without heat treatment (samples transverse)
11-25 ≥78 ≥18 -
25-80 ≥64 ≥15 -

Description mechanical marks

Name Description
σU Limit short-term strength
d5 Elongation after rupture
d Elongation after rupture