Aluminium AD (1015)

  • Aluminum 1050
  • Aluminum 1145
  • Aluminum AD (1015)
  • Aluminum AD0 (1011)
  • Aluminum AD00 (1010)
  • Aluminum AD000
  • Aluminum AD1 (1013)
  • ADS Aluminum

    • Designation

    Name The value
    Designation GOST Cyrillic АД
    Designation GOST Latin AD
    Transliteration AD
    By chemical elements -
    Name The value
    Designation GOST Cyrillic 1015
    Designation GOST Latin 1015
    Transliteration 1015
    By chemical elements 1015

    Description

    Aluminium AD applies: for the manufacture of semi-finished products (drawn wire, sheets, tapes, strips, plates, profiles, panels, rods, pipes, forgings and stampings) by hot or cold deformation, as well as ingots and slabs; heat exchangers evaporators and condensers with two-sided bulge of the channel used in domestic refrigerators and freezers; roll foil used for thermal, hydro and sound insulation; cold-rolled foil intended for packaging of food, drugs, medical devices, cosmetic products industry, and also for the production of packaging materials based on it; part clad with copper on one side (APM-1) and intended for various products in the electrical industry.

    Note

    ISO 209−1 aluminium brand AD has a designation А199,0 and 1200.

    Standards

    Name Code Standards
    Tape В54 GOST 13726-97, OST 1-92006-79
    Tubes of non-ferrous metals and alloys В64 GOST 18482-79, TU 1-5-185-76
    Bars В55 GOST 21488-97
    Non-ferrous metals, including rare, and their alloys В51 GOST 4784-97, OST 1 92014-90
    Sheets and strips В53 GOST 618-73, GOST 17232-99, GOST 21631-76, GOST 25001-81, GOST 745-2003, OST 4-021.048-78, OST 1-92045-75, TU 1-9-548-87
    Bars and shapes В52 GOST 8617-81, GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92, OST 1 92093-83, OST 1 92069-77
    Wire from nonferrous metals and their alloys В74 OST 1 92005-2002

    Chemical composition

    Standard Mn Cu Al Ti Zn
    GOST 4784-97 ≤0.05 ≤0.05 ≥99 ≤0.05 ≤0.1
    Al is the base.
    According to GOST 4784-97, the total mass fraction of silicon + iron ≤ 1.00%, the mass fraction of other impurities ≤ 0.05% each, the total mass fraction of other impurities ≤ 0.15%, the total mass fraction of all impurities ≤ 1.0%.

    Mechanical properties

    Section, mm σU, MPa d5, % d
    The tape is able to supply for OST 1-92006-79
    5-10.5 ≥68.6 - ≥15
    0.25-0.5 ≥58.8 - ≥20
    0.5-0.9 ≥58.8 - ≥25
    0.9-10.5 ≥58.8 - ≥28
    0.25-0.8 ≥147.7 - ≥3
    0.8-3.5 ≥147.7 - ≥4
    3.5-4 ≥147.4 - ≥5
    Sheet metal in delivery condition according to GOST 21631-76, OST 4.021.047-92 tape according to GOST 13726-97 (samples transverse)
    5-10.5 ≥70 - ≥15
    0.3-0.5 ≥60 - ≥20
    0.5-0.9 ≥60 - ≥25
    0.9-10.5 ≥60 - ≥30
    0.3-0.8 ≥145 - ≥3
    0.8-3.5 ≥145 - ≥4
    3.5-10.5 ≥130 - ≥5
    0.8-4.5 ≥100 - ≥6
    Plates according to GOST 17232-99. 4.021.061-92 supplied without heat treatment (samples transverse)
    11-25 ≥78 ≥18 -
    25-80 ≥64 ≥15 -
    The wire drawn according to OST 1 92005-2002
    ≤12 - ≥20 -
    Extruded normal strength according to GOST 8617-81 on delivery
    ≥59 ≥20 -
    The pressed bars normal strength in the delivery condition according to GOST 21488-97 (longitudinal samples)
    8-300 ≥60 ≥25 -
    Tubes extruded in the state of delivery according to GOST 18482-79 (samples, in cross-section shows the thickness of the wall)
    ≥60 ≥20 -

    Description mechanical marks

    Name Description
    σU Limit short-term strength
    d5 Elongation after rupture
    d Elongation after rupture