Aluminium AD00 (1010)

  • Aluminum 1050
  • Aluminum 1145
  • Aluminum AD (1015)
  • Aluminum AD0 (1011)
  • Aluminum AD00 (1010)
  • Aluminum AD000
  • Aluminum AD1 (1013)
  • ADS Aluminum

    • Designation

    Name The value
    Designation GOST Cyrillic АД00
    Designation GOST Latin AD00
    Transliteration AD00
    By chemical elements -
    Name The value
    Designation GOST Cyrillic 1010
    Designation GOST Latin 1010
    Transliteration 1010
    By chemical elements 1010

    Description

    Aluminium AD00 used: for the manufacture of semi-finished products (sheets, tapes, strips, plates, profiles, panels, rods, tubes, wire, stampings and forgings) by hot or cold deformation, slabs and ingots; extruded pipes with controlled inner diameter from 14 to 42 mm for heat exchangers.

    Note

    ISO 209−1 aluminium brand AD00 is designated А199,7 and 1070А, aluminum brand AD00E (with guaranteed electrical characteristics) is designated ЕА199,7 and 1370.

    Standards

    Name Code Standards
    Tape В54 GOST 13726-97, OST 1-92006-79, TU 1-2-133-77
    Sheets and strips В53 GOST 17232-99, GOST 21631-76, OST 1-92045-75
    Tubes of non-ferrous metals and alloys В64 GOST 18482-79, OST 4-021.129-78, OST 4.021.129-92, TU 1-3-041-91, TU 1-9-1057-80, TU 1-9-194-72, TU 1-9-340-73, TU 1-3-67-90, TU 1-3-67-98
    Non-ferrous metals, including rare, and their alloys В51 GOST 4784-97, OST 4.021.009-92, TU 1-4-162-80
    Bars and shapes В52 GOST 8617-81, GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92, OST 1 92093-83
    Processing of metals by pressure. Forgings В03 OST 26-01-152-82
    Bars В55 TU 1-2-253-78

    Chemical composition

    Standard Mn Si Fe Cu Al Ti Zn Mg
    GOST 4784-97 ≤0.03 ≤0.2 ≤0.25 ≤0.03 ≥99.7 ≤0.03 ≤0.07 ≤0.03
    Al is the base.
    According to GOST 4784-97, the mass fraction of other impurities is ≤ 0.03% each, the total mass fraction of all impurities is ≤ 0.30%. For aluminum grade AD00E (with guaranteed electrical characteristics), the mass percentages of impurities are set: silicon ≤ 0.10%, copper ≤ 0.020%, manganese ≤ 0.010%, magnesium ≤ 0.020%, chromium ≤ 0.010%, iron ≤ 0.25%, zinc ≤ 0.040%, boron ≤ 0.020, titanium + vanadium ≤ 0.020%.

    Mechanical properties

    Section, mm sT|s0,2, MPa σU, MPa d5, % d
    The tape is able to supply for OST 1-92006-79
    5-10.5 - ≥68.6 - ≥15
    0.25-0.5 - ≥58.8 - ≥20
    0.5-0.9 - ≥58.8 - ≥25
    0.9-10.5 - ≥58.8 - ≥28
    0.25-0.8 - ≥147.7 - ≥3
    0.8-3.5 - ≥147.7 - ≥4
    3.5-4 - ≥147.4 - ≥5
    Sheet metal in delivery condition according to GOST 21631-76, OST 4.021.047-92 tape according to GOST 13726-97 (samples transverse)
    5-10.5 - ≥70 - ≥15
    0.3-0.5 - ≥60 - ≥20
    0.5-0.9 - ≥60 - ≥25
    0.9-10.5 - ≥60 - ≥30
    0.3-0.8 - ≥145 - ≥3
    0.8-3.5 - ≥145 - ≥4
    3.5-10.5 - ≥130 - ≥5
    0.8-4.5 - ≥100 - ≥6
    Plates according to GOST 17232-99. 4.021.061-92 supplied without heat treatment (samples transverse)
    11-25 - ≥78 ≥18 -
    25-80 - ≥64 ≥15 -
    Forging after annealing at OST 26-01-152-82
    ≥20 ≥60 ≥25 -
    Extruded aluminum tubes with internal diameter control for heat exchangers as supplied without a heat treatment on the other 1-3-67-90 (in the section you specify an internal pipe diameter
    14-42 - 59-98 - ≥28
    Tubes extruded in the state of delivery according to GOST 18482-79 (samples, in cross-section shows the thickness of the wall)
    - ≥60 - ≥20
    Tube, drawn, seamless rectangular cross section as delivered to EAST 4.021.129-92, TU 1-9-194-72
    - ≥58.8 - ≥12

    Description mechanical marks

    Name Description
    sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
    σU Limit short-term strength
    d5 Elongation after rupture
    d Elongation after rupture

    Physical characteristics

    Temperature r, kg/m3
    0 2700

    A description of the physical symbols

    Name Description
    Е The normal elasticity modulus
    r Density
    l Coefficient of thermal conductivity
    R UD. the resistivity
    С Specific heat