Bronze Bro10f1 (БрОФ10-1)

Designation

Name The value
Designation GOST Cyrillic БрО10Ф1
Designation GOST Latin BpO10F1
Transliteration BrO10F1
By chemical elements BaSn10P1
Name The value
Designation GOST Cyrillic БрОФ10-1
Designation GOST Latin BpOF10-1
Transliteration BrOF10-1
By chemical elements BaSnP10-1

Description

Bronze Bro10f1 used: for the production of ingots from scrap and waste of nonferrous metals and alloys used as charge material for the manufacture of tin bronze casting; casting parts, friction fittings, heavy-loaded parts, auger drives, spindle plates and nuts, crowns worm wheels; casting parts, metallurgical machinery (gears, uterine nuts, bearings, bushings, piston rings, worm wheels and other parts exposed to friction and high wear in machines precise handling); casting parts for shipbuilding, marine engineering and instrument making; crowns worm wheels, nuts, and other parts for especially severe conditions of work; details of bodies of rotation (outer diameter up to 600 mm and length 500 mm).

Note

Vysokohromistyh bronze. The alloy system Cu-Sn-P. Is a substitute for bronzes brands Bra10zh3mc2 (Brazhmc10−3-1.5) and Bra9zh3l (Brazh9−4L), brass Lazhmc (ЛАЖМц66−6-3−2). The coefficient of friction of bronze without lubrication of 0.10, with grease — 0,008. The maximum allowable speed — 10 m/s Maximum load rating: static — 150 kgf/cm2, dynamic — 250 kgf/cm2 s.

Standards

Name Code Standards
Non-ferrous metals, including rare, and their alloys В51 GOST 613-79, GOST 614-97, OST 1 90054-72, STP М314-95
Castings, non-ferrous metals and alloys В84 OST 1 90046-72, OST 24.916.01-71, OST 5Р.9209-82

Chemical composition

Standard S P Si Ni Fe Cu As Al Zn Sn Sb Pb Bi Mg
OST 5Р.9209-82 ≤0.05 0.4-1.1 ≤0.02 ≤2 ≤0.2 Rest ≤0.15 ≤0.02 ≤0.3 9-11 ≤0.3 ≤0.3 ≤0.02 ≤0.02
STP М314-95 ≤0.05 0.4-1.1 ≤0.02 ≤2 ≤0.2 Rest ≤0.15 ≤0.02 ≤0.3 9-11 ≤0.3 ≤0.3 - ≤0.02
GOST 614-97 ≤0.05 0.7-1.2 ≤0.02 ≤1 ≤0.2 Rest - ≤0.05 ≤0.5 9.1-10.5 ≤0.3 ≤0.5 ≤0.005 ≤0.02
OST 24.916.01-71 ≤0.02 0.8-1.2 ≤0.02 ≤1.5 ≤0.2 Rest - ≤0.02 - 9-11 ≤0.5 - ≤0.005 ≤0.02
OST 1 90054-72 - 0.4-1 ≤0.02 - ≤0.3 Rest - ≤0.02 ≤0.3 9-11 ≤0.3 ≤0.3 ≤0.02 -
Cu is the basis.
The total percentage of impurities in the OST 1 90054-72 (elements with a content of ≤) is 0.9%. Impurities that are not regulated by the table are included in the total amount of impurities.
According to GOST 613-79, OST 5P.9209-82 and STP M314-95, the total content of impurities should be ≤ 1.00%. Impurities not regulated by the standard are included in the total amount of impurities. The mass fraction of nickel due to copper and the sum of impurities is not included.
According to OST 24.916.01-71 the total content of impurities should be ≤ 0.75%. The content of nickel is allowed due to the copper content.
According to GOST 614-97 the chemical composition is given for bronze БрО10Ф1, made in the form of ingots from scrap and wastes of non-ferrous metals and alloys. The total mass fraction of impurities is ≤ 1.40%. Nickel can be included in the mass fraction of copper - in this case nickel in the sum of impurities is not taken into account.

Mechanical properties

sT|s0,2, MPa σU, MPa d5, % KCU, kJ/m2 HB, MPa
Castings are supplied without heat treatment
≥98 ≥215.5 ≥3 ≥58.8 ≥80
- ≥245 ≥3 ≥58.8 ≥90
- ≥295 ≥8 - ≥90
Casting investment casting according to OST 1 90046-72 (samples separately cast or cut from castings)
- ≥245 ≥10 - ≥90

Description mechanical marks

Name Description
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σU Limit short-term strength
d5 Elongation after rupture
KCU Toughness
HB Brinell hardness number

Physical characteristics

Temperature r, kg/m3
20 8670

A description of the physical symbols

Name Description
r Density
l Coefficient of thermal conductivity
R UD. the resistivity

Technological properties

Name The value
Weldability good weldability.