Alloy Amg1,5 is used: for the manufacture of semi-finished products (sheets, tapes, strips) by hot or cold deformation of welded and riveted structural elements of aircraft construction and shipbuilding, experiencing a relatively light load and require high corrosion resistance.

Note

High quality alloy system Al-Mg.
ISO 209−1 alloy brand Amg1,5 has a designation of AlMg1,5 and 5050.

Standards

Name	Code	Standards
Non-ferrous metals, including rare, and their alloys	В51	GOST 4784-97
Bars and shapes	В52	OST 1 92093-83

Chemical composition

Standard	Mn	Cr	Si	Fe	Cu	Al	Zn	Mg
GOST 4784-97	≤0.1	≤0.1	≤0.4	≤0.7	≤0.2	Rest	≤0.25	1.1-1.8

Al is the base.
According to GOST 4784-97, the mass fraction of each other impurity (not regulated) is ≤ 0.05%, the total mass fraction of other impurities is ≤ 0.15%.

Physical characteristics

Temperature	r, kg/m³
20	2690

A description of the physical symbols

Name	Description
r	Density

Technological properties

Name	The value
Weldability	The alloy is well welded all types of welding - TIG, contact, spot, and seam welding. The corrosion resistance of the alloy (and the weld) high, is almost the same as that of pure aluminum.
Machinability	The poor machinability in the annealed condition and satisfactory cold-worked.
Pressure treatment	Well-deformed in hot and cold condition.
Corrosion resistance	Alloy with excellent General corrosion resistance, not cloned to stress corrosion cracking and intergranular corrosion (especially in the annealed condition). For additional protection parts against corrosion is anodizing or applied coatings.

Alloy Amg1,5

Designation

Description