Alloy ЖС6К

  • Alloy ZhS3LS
  • Alloy KhN63MYUTBV (SZHL-800; EK112)
  • Alloy KhN58KTVYUMBL (ChS104)
  • Alloy KhN58KVTYUMBL (ChS70; CH25)
  • Alloy KhN57KVYUTMBRL (ChS88U)
  • Alloy KhN57KVYUTMBL (ChS88)
  • Alloy KhN57VMTYUBL (ChS91)
  • Alloy KhN54MVTYUL (ChS94)
  • Alloy CrN35Zh14AMTL
  • Alloy LK4
  • Alloy L114
  • Alloy ZhS6K
  • Alloy ZhS3DK
  • Alloy VZHL2M
  • Alloy VZHL15
  • Alloy B56
  • Alloy B3K
  • Alloy Biduloid
  • Alloy 45X26H33S2B2
  • Alloy 45Х26Н23С2Б2
  • Alloy 12XH28MDTL (EI629)
  • Alloy 06Х20Н10М3Д3С4Л (06Х20Н10М3Д3С4)

    • Designation

    Name The value
    Designation GOST Cyrillic ЖС6К
    Designation GOST Latin ZhC6K
    Transliteration GS6K
    By chemical elements FePb6

    Description

    Alloy ЖС6К used: for the production of cast bar billets (LPZ), intended for subsequent remelting and casting of gas turbine components.

    Note

    High-temperature casting Nickel-based alloy.

    Standards

    Name Code Standards
    Bars and shapes В32 OST 1 90126-85
    Non-ferrous metals, including rare, and their alloys В51 OST 1 90127-85
    Test methods. Packing. Marking В39 OST 1 90181-75
    Bars В55 TU 1-809-1025-98

    Chemical composition

    Standard C S P Mn Cr Si Ni Fe N Al B Ti Mo Pb Bi W Ce O Zr Co
    OST 1 90127-85 0.13-0.2 ≤0.015 ≤0.015 ≤0.4 9.5-12 ≤0.4 Rest ≤2 - 5-6 ≤0.02 2.5-3.2 3.5-4.8 ≤0.001 ≤0.0005 4.5-5.5 ≤0.015 - - 4-5.5
    OST 1 90126-85 0.13-0.2 ≤0.015 ≤0.015 ≤0.4 9.5-12 ≤0.4 Rest ≤2 - 5-6 ≤0.02 2.5-3.2 3.5-4.5 ≤0.001 ≤0.0005 4.5-5.5 ≤0.025 - ≤0.04 4-5.5
    TU 1-809-1025-98 0.12-0.17 ≤0.01 ≤0.015 ≤0.3 9.5-12.5 ≤0.3 Rest ≤1 ≤0.005 5-6 0.005-0.01 2.5-3.2 3.5-4.5 ≤0.001 ≤0.0005 4.5-5.5 ≤0.015 ≤0.005 ≤0.03 4.5-5.5
    Ni is the basis.
    According to TU 1-809-1025-98 the chemical composition is given for the alloy ZhS6K-VI.
    According to OST 1 90126-85 the chemical composition is given for the alloy ZhS6K-VI. Boron, zirconium and cerium are introduced by calculation and chemical analysis are not determined. In the alloy, a deflection of boron plus 0.005% is allowed. In the alloy, the presence of non-deformable elements: vanadium, niobium and hafnium in the amount of not more than 0.20%, with vanadium not more than 0.10%.
    According to OST 1 90127-85 the chemical composition is given for the alloy ZhS6K. Boron, cerium and zirconium are introduced into the metal by calculation and chemical analysis are not determined.

    Mechanical properties

    Section, mm sT|s0,2, MPa σU, MPa d5, % y, % KCU, kJ/m2
    Cast rod stock (LPZ) on the other 1-809-1025-98. Alloy ЖС6К-VI. Heating to 1200-1220 °C, exposure 4 hours, air cooling
    ≥784 ≥882 ≥2.5 ≥3 ≥147

    Description mechanical marks

    Name Description
    sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
    σU Limit short-term strength
    d5 Elongation after rupture
    y The relative narrowing
    KCU Toughness