Alloy ХН51МТЮКФР (ЭП220)

Designation

Name The value
Designation GOST Cyrillic ХН51МТЮКФР
Designation GOST Latin XH51MTJuKFP
Transliteration HN51MTYuKFR
By chemical elements CrNi51CuTeAlCoPHg
Name The value
Designation GOST Cyrillic ЭП220
Designation GOST Latin EP220
Transliteration EhP220
By chemical elements -

Description

Alloy ХН51МТЮКФР used: for the manufacture of hot-rolled bars; different details of responsible use of power plant engineering, engine building, turbine.

Note

High-temperature Nickel-based alloy.

Standards

Name Code Standards
Bars and shapes В32 GOST 23705-79, TU 14-1-223-72, TU 14-1-402-72

Chemical composition

Standard C S P Mn Cr Si Ni Fe Cu Al V B Ti Mo W Co
GOST 23705-79 ≤0.08 ≤0.009 ≤0.015 ≤0.5 9-12 ≤0.5 Rest ≤3 ≤0.07 3.9-4.8 0.2-0.8 ≤0.02 2.2-2.9 5-8 5-7 14-16
Ni is the basis.
According to GOST 23705-79 the chemical composition is given for the alloy ХН51ВМТЮКФР-ВД. Boron is introduced into the metal by calculation and chemical analysis is not determined. Mass fraction of residual elements and deviations in chemical composition - in accordance with GOST 5632.
According to TU 14-1-402-72, the chemical composition is given for the alloy ХН51МТЮКФР-ВД.
According to TU 14-1-223-72 in the alloy, the presence of antimony, tin, bismuth and arsenic is allowed for no more than 1 point of the spectral analysis scale. Boron is introduced into the metal by calculation and chemical analysis is not determined.

Mechanical properties

Section, mm σU, MPa d5, % y, % HB, MPa
Bars hot rolled and forged and according to GOST 23705-79, THE 14-1-223-72. Annealing in air 1210-1230 °C (exposure 4 h) + Heating to 1040-1060 (exposure 4 h), air cooling + Ageing at 940-960 °C (exposure 2 hours), air cooling
- - - 285-341
≥490 ≥6 ≥9 -

Description mechanical marks

Name Description
σU Limit short-term strength
d5 Elongation after rupture
y The relative narrowing
HB Brinell hardness number