Steel 12Г2СБ

Designation

Name The value
Designation GOST Cyrillic 12Г2СБ
Designation GOST Latin 12G2CB
Transliteration 12G2SB
By chemical elements 12Mn2СNb

Description

12Г2СБ steel is used: for the manufacture of electrowelded pryamoshovny pipes of strength group К56 for construction of gas pipelines, oil pipelines and oil product pipelines.

Standards

Name Code Standards
Steel pipes and fittings to them В62 TU 14-158-153-05, TU 14-158-146-2004, TU 14-3-1573-96

Chemical composition

Standard C S P Mn Cr Si Ni Fe Cu N Al V Ti Nb
TU 14-158-146-2004 0.1-0.14 ≤0.015 ≤0.02 1.4-1.7 - 0.25-0.5 - Rest - ≤0.01 - ≤0.08 - 0.04-0.07
TU 14-3-1573-96 0.1-0.14 ≤0.02 ≤0.025 1.4-1.75 ≤0.3 0.25-0.5 ≤0.3 Rest ≤0.3 ≤0.012 0.01-0.06 - 0.005-0.02 0.04-0.07
Fe is the basis.
According to TU 14-3-1573-96, the carbon equivalent of Se ≤ 0.44%. It is allowed to introduce into the steel a technological additive silicocalcium or rare-earth materials (REM) at the rate of 0.5-2.0 kg per 1 ton of steel.
According to TU 14-158-146-2004 the chemical composition is given for the ladle sample for the 1st level of the quality of the pipes. For pipes of the 2nd level of quality in the ladle sample, the mass fraction of manganese = 1.40-1.80%, sulfur ≤ 0.010%, phosphorus ≤ 0.015%, nitrogen ≤ 0.006%. Vanadium is optional and is introduced into steel by calculation with the manufacturer's agreement with the consumer.

Mechanical properties

Section, mm sT|s0,2, MPa σU, MPa d5, % KCU, kJ/m2
Longitudinal electric-welded pipes of oil and gas as delivered at TU 14-3-1573-96 (samples transverse; column cross section - outer diameter; in the graph the value is KCU KCU-60 °C)
530, 720, 820, 1020 ≥380 ≥550 ≥20 ≥392

Description mechanical marks

Name Description
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σU Limit short-term strength
d5 Elongation after rupture
KCU Toughness