Steel SHKH10

  • Steel 110Kh18M (110Kh18M-SHD)
  • Steel 11X18M
  • Steel 60X13S (60X13S-SHD)
  • Steel 8Х4В9Ф2 (ЭИ347; 8Х4В9МФ2)
  • Steel 8X4M4V2F1 (DI43)
  • ShKh10 steel
  • ShKh15 steel
  • ShKh15S2G3 steel
  • ShKh15SG steel
  • ShKh15SM steel (DI36)
  • ShKh20SG steel
  • ShKh4 steel

    • Designation

    Name The value
    Designation GOST Cyrillic ШХ10
    Designation GOST Latin ShX10
    Transliteration ShH10
    By chemical elements -

    Description

    SHKH10 steel is used: for the manufacture of rolled strips with thickness 1.5−7.6 mm wire intended for manufacture of twisted roller bearings.

    Standards

    Name Code Standards
    Tape В34 GOST 808-70

    Chemical composition

    Standard C S P Mn Cr Si Ni Fe Cu
    GOST 808-70 0.32-0.42 ≤0.03 ≤0.03 0.4-0.7 0.8-1.2 0.17-0.37 ≤0.2 Rest ≤0.25
    Fe is the basis.

    Mechanical properties

    Section, mm σU, MPa d HRC
    Flattened strip of 1.5-7.6 mm ataegina in the state of delivery according to GOST 808-70 (δ in the graph specified elongation l0=100 mm)
    ≤2.5 570-810 ≥7 -
    2.5 510-760 ≥12 -
    Flattened strip GOST 808-70. Quenching in oil 840-860 °C (delay of 1.5 min for each mm of thickness of the tape) and Leave at 180 °C (aged for at least 2 h)
    1.5-7.6 - - ≥45

    Description mechanical marks

    Name Description
    σU Limit short-term strength
    d Elongation after rupture
    HRC Rockwell hardness (indenter diamond spheroconical)