Designation
| Name |
The value |
| Designation GOST Cyrillic |
Св-01Х19Н18Г10АМ4 |
| Designation GOST Latin |
Cb-01X19H18G10AM4 |
| Transliteration |
Sv-01H19N18G10AM4 |
| By chemical elements |
01Cr19Н18Mn10NMo4 |
| Name |
The value |
| Designation GOST Cyrillic |
ЭП690 |
| Designation GOST Latin |
EP690 |
| Transliteration |
EhP690 |
| By chemical elements |
- |
Description
Steel SV-01Х19Н18Г10АМ4 used: for the production of welding wire diameter 2.0−6.0 mm for automated welding of parts made of Nickel alloys with high requirements for intergranular corrosion of the weld and resistance to aggressive environments; for welding and surfacing of equipment parts in chemical and power engineering.
Note
Corrosion resistant, vysokoorganizovannaja chromium-Nickel steel alloyed with molybdenum.
Standards
| Name |
Code |
Standards |
| Welding and cutting metals. Soldering, riveting |
В05 |
TU 14-1-4981-91 |
Chemical composition
| Standard |
C |
S |
P |
Mn |
Cr |
Si |
Ni |
Fe |
N |
Mo |
| TU 14-1-4981-91 |
≤0.03 |
≤0.02 |
≤0.025 |
8.5-10.5 |
18-20 |
≤0.6 |
17-19 |
Rest |
0.15-0.25 |
3.2-4.2 |
Fe is the basis.
According to TU 14-1-4981-91 the chemical composition is given for steel grade Sv-01H19N18G10AM4 (EP690). In steel, the deviation from the nitrogen content is +0,050%.
Mechanical properties
| Section, mm |
σU, MPa |
| Wire in the delivery state on the other 14-1-4981-91 |
| 2 |
780-1180 |
| 2 |
690-980 |
| 2 |
690-1030 |
| 2 |
640-930 |
Description mechanical marks
| Name |
Description |
| σU |
Limit short-term strength |
Technological properties
| Name |
The value |
| Particularities of production of goods |
The surface of wire should be clean and smooth, without cracks, delaminations, captured, sunsets, shells, dents, scale, rust, oil and other contaminants. On the surface of the wire allowed the risks (including covered), scratches, local Rabina and individual dents. The depth of these defects shall not exceed tolerances for the wire diameter. Wire comes in etched and bleached condition. |
