Wire, circle, bar Monel 400® - 2.4360

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
NMZHMts28-2.5-1.5 2.4360 N04400 NiCu30Fe Delivery from the stock, in stock

Monel is a copper-nickel alloy with additives of iron, manganese and other elements. It was patented in 1905 by a Canadian metallurgical company and was named after President A. Monel. The alloy is refractory, its t° of melting almost 1350 °C, it is operated at t° up to 500 °C. Monel 400 and NMZhMz 28-2,5-1,5 (28% Cu, about 2.5% Fe and up to 2% Mn, the rest of the alloy - Ni, started to produce in the USSR) are similar in chemical composition, typical mechanical and physical properties and scope of application.

Chemical composition of Monel 400

C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Ti Al Fe
0,3 2,0 0,024 0,5 63.0 min 28-34 2,5

Range

Available in wire, rounds, rods, bands and sheets. Wire and rod can be both round and square. Products are made in accordance with CMTU 664-41 (wire) and GOST 1525-53 (rod). Monel allows to create different protective coatings being resistant to corrosion not only in the air but also in water, in most acids and alkalis.

Application

Chemical, medical (pharmaceutical), oil-refining, shipbuilding, textile industry. Wire, rod are stable in sea water, environments saturated with neutral and caustic alkaline salts, so they are used in salt evaporation plants. Products made of this alloy do not react with hydrofluoric acid and fluorine and are widely used in chemical industry because of resistance to dilute mineral acids - hydrochloric and sulphuric. Monel pipe is used in the construction of steam generators, in the production of salt by heating and evaporation, as well as various units operating in an oxygen environment under pressure at high temperatures. Monel 400 is also called Nicorros. In addition to being corrosion resistant in most chemical environments, the alloy has good weldability. Welding is usually done with non-consumable tungsten electrodes, followed by pressure treatment.

Supply

All of the products shown are certified. Technical documentation includes data on chemical composition, the limiting percentage of impurities, and mechanical properties of the products. From us you can buy in bulk any semi-finished products for large-scale productions. We also offer optimum conditions for retail buyers. The high level of service and responsiveness of service is the face of our company.

Buy at the best price

Evek GmbH has an unlimited range of nickel alloys of the highest quality. We offer special alloys at the best price. If you are interested in our offer, please contact your nearest office. Qualified specialists will provide all necessary information regarding products, price range, sales conditions. The cost of goods depends on the parameters of products and additional terms of delivery.