Wire, rounds, dural D16T bars
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| D16T | Delivery from the stock, in stock |
Supplier
We offer to buy duralumin circles, bars, wires D16T at an affordable price from specialized warehouses of the supplier Evek GmbH with delivery in any city. You can order products with non-standard parameters. We have the best price-quality ratio for the entire range of products. Supplier Evek GmbH offers to buy duralumin circles, bars, a wire D16T or rolls of any similar mark, the price - optimum in the given segment of rolled products.
Technical characteristics
Grade: wrought aluminum alloy, aluminum content of 90.9 - 94.7%. The addition T to the grade designation indicates naturally hardened and aged, T1 indicates naturally hardened and artificially aged. The hardness after quenching and aging is HB 10 -1 = 105 MPa. Alloy annealed HB 10 -1 = 42 MPa. Alloy is available in the form of bars and sheets, forging material, tubes.
Percentage composition, GOST 4784-97
| Al | Fe | Si | Mn | Cr | Ti | Al | Cu | Mg | Ti+Zr | Zn | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|---|
| base | ≤0.5 | ≤0.5 | 0.3 - 0.9 | ≤0.1 | ≤0.15 | 90.9 - 94.7 | 3.8 - 4.9 | 1.2 - 1.8 | ≤0.2 | ≤0.25 | ≤0.15 |
Mechanical properties (temperature 20°C)
| Range | Size | GOST | s in | sT | d5 | Heat treatment |
|---|---|---|---|---|---|---|
| - | mm | - | MPa | MPa | % | - |
| Rods | Ø 8 - 300 | 21488-97 | 390-410 | 275-295 | 8-10 | Hardening and aging |
| High-strength rods | 51834-2001 | 450-470 | 325-345 | 8-10 | Hardening and aging | |
| Rods, increased ductility | 51834-2001 | 410 | 265 | 12 | Hardening and aging |
Physical properties of material
| t°C | E 10- 5 | a 10 6 | l | r | C |
|---|---|---|---|---|---|
| Degree | N/mm2 | 1/Gradus | W/(m-degree) | kg/m3 | J/(kg-degree) |
| 20 | 0.72 | 2770 | |||
| 100 | 22.9 | 130 | 0.922 |
sB - Ultimate short time strength
sT - limit of proportionality (yield strength for permanent deformation)
d5 - Tensile elongation at break.
HB - Brinell hardness
E - Modulus of elasticity of the first kind
C - Specific heat capacity
Application
Rolled steel is used under moderate load for power elements of aircraft structures, car bodies, for parts operating at temperatures up to -230 ° C.
Buy, bargain price.
Supplier Evek GmbH offers D16T dural rounds, bars, wire, price - determined by technological features of production without including additional costs. The company's website displays information on the latest arrivals of products. Buy dural round, bar, wire D16T today. In the segment of non-ferrous rolled products company Evek GmbH is a profitable supplier.