Sheet, wire VT-5 - titanium grade6
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| BT5 | 3.7115 | R54520 | Ti5Al2.5Sn | Delivery from the stock, in stock | |
| BT5-1 | 3.7115 | R54520 | Ti5Al2.5Sn | Delivery from the stock, in stock |
Technical characteristics of VT5-1 sheet, plate
| Semifinished product | Thickness (mm) | Heat treatment | Strength (MPa) | Plasticity δ% | KCU J/cm³ |
|---|---|---|---|---|---|
| Sheet VT5-1 | П | Warm rolling | 1055 | 7,9% | --- |
| Sheet VT5-1 | Д | Warm rolling | 1037 | 5,3% | --- |
| Sheet VT5-1 | 0,8 - 1,2 | Annealing | 735 - 932 | Over 15% | --- |
| Sheet VT5-1 | 1,5 - 1,8 | Annealing | 735 - 932 | Over 12% | --- |
| Sheet VT5-1 | 2,0 - 6,0 | Annealing | 735 - 932 | Over 10% | --- |
| Sheet VT5-1 | 6,5 - 10,0 | Annealing | 735 - 932 | Over 8% | --- |
| Sheet VT5-1 | 2 mmD | Annealed at 800° | 844 | 16,8% | --- |
| Sheet VT5-1 | 3 mmP | annealed at 750° 20 min | 867 | 12,6% | --- |
| Sheet VT5-1 | 3 mmD | annealed at 750° 20 min | 872 | 20% | --- |
| Sheet VT5-1 | 3 mmP | Vacuum annealing750° 1 h. | 813 | 18,5% | --- |
| Sheet VT5-1 | 3mmD | Vacuum annealing750° 1 h. | 823 | 22,3% | --- |
| VT5-1 sheet | 0,3 - 10,5 | Annealing | More than 735 | 8 - 15% | --- |
| Plate VT5-1 | 11 - 35 | Annealing | 735 - 930 | More than 6% | |
| Plate VT5-1 | 12 - 20 | Delivery condition | 735 - 932 | More than 6% | |
| Plate VT5-1 | 21 - 60 | Delivery condition | 735 - 932 | More than 5% |
E - longitudinal direction of cut samples; P - transverse; H - height, T - tangential.
Heat resistance of VT5-1 sheet
Heat resistance is characterized by the creep limit - the greatest stress under the action of which the material at a given temperature deforms by a given amount. Index through a fraction - the deformation and the time (in hours) in which this deformation occurs.
| Semi-finished product | t°C | Creep strength (MPa) |
|---|---|---|
| Sheet 1.8 mm | 250° | 500 |
| Sheet 1.8 mm | 300° | 450 |
| 150° 450 Sheets 1.8 mm | 350° | 380 |
| 150° 350° Leaf 1.8 mm | 500° | 50 |
The long-term strength of VT5-1 sheet
The long-term strength is the greatest stress under the action of which a material at a given temperature breaks, after a specified period of time. A sample is subjected to the action of constant stresses of different levels before fracture at different temperatures. Naturally, the higher the temperature and the longer the load duration, the lower the tensile strength.
| Semifinished product | t°C | Continuous strength (MPa) |
|---|---|---|
| Sheet1.8 mm | 250° | 590 |
| Sheet1.8 mm | 300° | 560 |
| 1.8 mm sheet | 400° | 390 |
| 1.8 mm sheet | 500° | 170 |
| Sheet1.5 mm | 350° | 441 - 510 |
| Sheet1.5 mm | 500° | 245 - 294 |
| 1.5 mm sheet | 550° | 127 - 245 |
| 1.5 mm plate | 700° | 49 |
| Sheet3 mm | 250° | 578 |
| 3 mm Sheet | 300° | 550 |
| 3 mm Sheet | 350° | 530 |
| Sheet3 mm | 500° | 167 |
| Sheet | Thickness (mm) | Heat treatment | Loading diagram | R | Endurance limit (MPa) 10.000.000 |
|---|---|---|---|---|---|
| VT5-1 | up to 3 mm | Annealing | Symmetrical loading | - 1 | 392 |
| VT5-1 | 1.8 mm | Annealing | Symmetrical loading | - 1 | Over 392 |
Applications
Heat resistance, corrosion and cryogenic resistance, ductility, low sensitivity to cuts, good weldability allow the wide use of sheet, plate and foil VT5, VT5-1 in shipbuilding, aviation, rocket science, cryogenic and chemical industry.
Supply
Sheet, plate and foil of titanium alloy VT5, VT5-1 of any parameters are supplied by Evek GmbH in retail and wholesale at the best prices. Technical documentation includes data on chemical composition, marginal percentage of impurities; mechanical properties of products. From us you can buy in bulk any semi-finished products for large-scale production. We also offer optimum conditions for retail buyers. The high level of service and responsiveness of service is the face of our company.
Buy at the best price
Evek GmbH has an unlimited range of titanium alloys of the highest quality. We offer special purpose alloys at an optimal price. If you are interested in our offer, please contact your nearest office. Qualified specialists will provide all necessary information concerning products, price range, sales conditions. The cost of goods depends on the parameters of products and additional terms of delivery.