6hs - 60MnSi4 - 6hs circles, bars, forgings

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
6XC 60MnSi4 Delivery from the stock, in stock

Evek GmbH offers to buy rounds, bars and forgings made of alloyed tool steels of 6ÕÑ, 60MnSi4, 6hs grades at economical prices from the manufacturer. Supplier provides strict conformity of the product range of supply, guarantees its timely delivery to the customer.

Chemical composition

Tool alloyed steel of 6HS grade in CIS countries is produced according to the technical requirements of GOST 5950. The composition of steel consists of:

  • Carbon - 0.60...0.70%;
  • Silicon 0.60...1.00%;
  • Manganese - 0.15 ... 0.40%;
  • Chrome - 1.30...1.60%.

Small amounts of copper, tungsten and vanadium (up to 0,15...0,3%), as well as nonmetallic impurities: sulfur - up to 0,025%, phosphorus - up to 0,030% are also allowed.

The foreign analogues of this steel are 60MnSi4 and 6hs. 6hs steel is melted by Polish metallurgical companies and has the same composition as 6HS steel. Steel 60MnSi4 (1.2826), produced according to DIN specifications, includes:

  • Carbon - up to 0.60%;
  • Silicon - up to 1.0%;
  • Manganese up to 1.1%;
  • Chromium - up to 0.3%.

Evek GmbH sells at producer price bars, rounds and forgings made of 6KhS, 60MnSi4, 6hs tool alloy steels. The supplier provides full conformity of the supplied range of products, guarantees timely delivery of the metal to the location specified by the customer.

Properties and application

Tool alloy steels 6KhS, 60MnSi4, 6hs are used for producing of percussion tools - hammers, punches, chisels, cold cutting tools , etc. They are characterized by high hardness in the cold state, which is ensured by appropriate modes of hardening and tempering. Steels are characterized by satisfactory machinability at cutting, milling and grinding with the use of carbide cutting tools.

The main physical and mechanical properties of the steels under consideration:

  • Ultimate strength, MPa - 750...800;
  • Relative elongation, % - 12;
  • Relative narrowing, % - 45;
  • Brinell hardness, HB - 230...240;
  • Hardness after hardening, HRC - 53...57;
  • Impact toughness, kJ/m2 - 21 ... 24.

Buy a bar, rounds and forgings, made of tool alloy steels grades 6HS, 60MnSi4, 6hs, at producer prices offers the company Evek GmbH. The supplier ensures compliance with the range of product delivery, timely transportation of metal to the address set by the customer is guaranteed.