12KH1MF - 14MoV6-3 - 13hmf pipe, round, rod
|Mark||Analogue||W. Nr.||Aisi Uns||En||Order|
|12Х1МФ||14MoV63||Delivery from the stock, in stock|
Buy 12KH1MF low-alloy steel, 14MoV6−3, 13hmf, the company offers Electrocentury-steel. Operates a cost-effective price from the manufacturer. The company guarantees timely delivery of products to the point specified by the client
To by pipe, round, rod of heat resistant alloy steels 12KH1MF brands, 14MoV6−3,13 hmf is found in Electrocentury-steel. The price is from the manufacturer. Supplier guarantees the product range supplied profiles and timely delivery of products.
Composition and properties
In the domestic steel industry steel 12KH1MF is made in accordance with the norms of GOST 5520−79 and has the following chemical composition:
|Content, %||0,08…0,15||0,17…0,37||0,4…0,7||To 0.3||0,9…1,2||0,25…0,35||0,15…0,3||0.2|
Metallurgical impurities that exist in the steel — phosphorus and sulfur, the number of which is technologically constrained (for sulfur — 0,025%; phosphorus — 0,03%).
The closest foreign analogues are: Germany — steel 1.7715, 14MoV6−3 (steel comes mainly in the form of tubular steel), in Poland — steel 13hmf. Regulatory documents, which are the smelting of these steels are EN 10222−2 (long products) and EN 10216−2 (drawn pipe). The chemical composition meets the following analogs:
|Content, %||0,10…0,15||0,15…0,35||0,4…0,7||0.2||0,3…0,6||0,5…0,7||0,22 0,28…||To 0.025|
The phosphorus and sulfur content are limited respectively of 0.025% and 0.015%.
Buy at factory price heat resisting 12KH1MF low-alloy steel, 14MoV6−3, 13hmf — bargain offer from the company Electrocentury-steel. The provider offers a wide range of profiles, pipes, rods and circle.
Consider the steel after normalization has the following physical-mechanical characteristics:
- Tensile strength, MPa 490 580…(smaller values correspond to tubular profiles);
- The plastic limit, MPa — 305…450 (smaller values correspond to tubular profiles);
- Elongation, % — 23 to 33;
- The relative narrowing, % — 67…77;
- Hardness Brinell, HB — 123…177.
The resistance of the steel is maintained up to temperatures of 540…5600 C. the Material is insensitive to embrittlement during aging, however, welding of structures made of these steels should be made for special regimes, including the presence of the surface layer or any other inert protective gas. After hot forging the material acquires a fine-grained structure, and well handled pressure. 12KH1MF steel 14MoV6−3, 13hmf used in the manufacture of parts operating at elevated temperatures.
To buy bulk rolled heat-resistant 12KH1MF steel grades, 14MoV6−3, 13hmf, the company offers Electrocentury-steel. The price is from the manufacturer. Delivery of products is made at any point specified by the customer.