Foundry TL3 titanium alloy (Ti-3,75 Al) developed by CRI «Prometheus» for use in marine environments. Produced according to OST 5R.9071−88. In stock company «Electrovek-steel» offers a wide range of titanium mill products of the highest quality. All products are certified. The technical documentation includes data on the chemical composition, limiting the percentage of impurities; mechanical properties of products. We accept orders for the production of titanium alloy TL3 standard and custom sizes at the best price We can buy in bulk, any semi-finished products for large-scale productions. We also offer optimal conditions for retail customers. High level of service and efficiency of service are the face of our company.
Advantages of titanium alloy TL3
|Alloy||general characteristics||Technological properties||application|
|TL3||Different low strength but good ductility and corrosion resistance in seawater.||It has good casting properties and good welds.||Mainly products of marine engineering.|
Casting titanium alloys have lamellar stricture. In this regard, different shaped castings reduced strength and ductility, low fatigue resistance, they have relatively low fatigue crack growth rate and high fracture toughness. Parameters of lamellar structure shaped castings are determined by the casting conditions and vary in a very small range.
The use of titanium castings
The main field of application — marine engineering details. Of titanium castings are also produced parts of centrifuges, pumps, dryers, evaporators, crystallizers, valves for the petrochemical, hydrometallurgical industry and utilities. The most in demand: plates, housings, valve covers (walk-through, corner and safety); CDs and clinker hull valves, ball housing and impellers (impellers) centrifugal pumps.
A mandatory external examination, chemical composition analysis, inspection of mechanical properties of castings. Such quality control methods such as X-ray, gamma-Skopje, ultrasonic flaw detection, fluorescent (liquid-penentratny) control. Casting may also be pneumatic or gidronagruzkoy tested. To eliminate the hidden marriage, the casting is subjected to hot isostatic pressing, which brings them closer to the crystal structure of wrought semi-finished products.
Buy at the best price
The company «Electrovek-steel» delivers a wide range of high quality titanium castings and wholesale of standard and custom sizes. In stock in the presence of the cast alloy TL3 products at competitive prices. All parties castings have quality certificate for compliance with the standards and technical conditions of operation. The certificate is marked manufacturer, drawings number and name parts, alloy grade, heat number, details of the mechanical properties, chemical composition and the results of additional tests, such as hydro or pnevmoispytany. Implementation of orders takes minimal time. For wholesale buyers are stipulated preferential discounts.