5KHNM - 54NiCrMoV6 -1.2711 circle, forging, pipe, round, rod, forging
|Mark||Analogue||W. Nr.||Aisi Uns||En||Order|
|~5ХНМ||1.2711||54NiCrMoV6||Delivery from the stock, in stock|
Buy rod, circle, forged, made of tool alloyed steel grades 5KHNM and 54NiСrMoV-6 (1.2711) the company offers Electrocentury-steel. Products are sold at economical price from the manufacturer. The supplier ensures prompt transportation of metal to the address indicated by the customer.
Steel 5KHNM intended for the manufacture of tool hot deformation, and is a die steel of moderate heat resistance and high viscosity. In Russia and the CIS smelting of the steel is conducted in accordance with the requirements of GOST 5950. The chemical composition of steel is given in table:
|The percentage of steel||0,50…0,60||0,15…0,35||0,50…0,80||0,50…0,80||0,15 0,30…||1,40 1,80…|
GOST permits the presence in the steel 5KHNM non-metallic impurities — sulfur and phosphorus. Their percentage content in the finished product may not be higher than 0,025%.
Overseas steel similar purpose brand 54NiСrMoV-6 (1.2711) made according to European standards DIN and has the following chemical composition:
|The percentage of steel||0,50…0,60||0,15…0,35||0,50…0,80||0,60 0,80…||0,25…0,35||1,50 1,80…||0,08…0,12|
The standard allows up to 0.035% of sulfur in steel.
The company Electrocentury-steel offers to buy at the best price from the manufacturer of rod, circle, forged, made of tool alloyed steel grades 5KHNM and 54NiСrMoV-6 (1.2711). The supplier guarantees the compliance of the assortment and nomenclature of deliveries of the metal, ensures its timely delivery to the consumer.
Properties and applications
Steels of this type are characterized by high impact strength and hardenability at a moderate heat. This allows their use for the manufacture of die blocks and inserts of dies for forging and stamping hammers. Steel 5KHNM and 54NiСrMoV-6 (1.2711) are used also for tool for automated hot forging in the deformation of workpieces of non-ferrous metals and alloys, as well as matrices and knives for hot cutting.
The main physico-mechanical properties of steels:
- Tensile strength, MPa — 900;
- The plastic limit, MPa — 600;
- Elongation, % of 12;
- The modulus of elasticity, GPA — 434;
- Hardness on the Brinell hardness after annealing, HB — 244;
- Hardness after quenching HRC — 40…47;
- Thermomechanical fatigue cycles — 650…700.
Buy at factory price rod, scope and forgings of alloyed tool steels 5KHNM and 54NiСrMoV-6 (1.2711) the company offers Electrocentury-steel. The supplier guarantees compliance with item delivery, and ensures timely delivery of the products to the consumer.