34хн3ма - 36NiCrMo16 - 35NiCrMo16 - 1.6773 pipe, circle, rod

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
34ХН3МА 36NiCrMo16 Delivery from the stock, in stock

Evek GmbH offers to buy pipes, bars, circles made of structural alloy steels 34XHN3MA, 36NiCrMo16 (1.6773) or 35NiCrMo16. Deliveries are made at a favorable price from the manufacturer. Supplier provides timely delivery of rolled products ordered by the customer.

Chemical composition

Structural chromium-nickel-molybdenum medium-carbon steel 34XHN3MA, distinguished by its high quality, is produced in the CIS in accordance with TU-108-1028. Steel composition is as follows:

Element Carbon Silicon Manganese Chrome Nickel Molybdenum
Content, % 0,30...0,40 0,17...0,37 0,50...0,80 0,70...1,10 2,75...3,75 0,25...0,40

The content of nonmetallic impurities in the following limits: sulfur - not more than 0,035%, phosphorus - not more than 0,03%.

Abroad there are several steels of similar chemical composition. The most well-known are grades 36NiCrMo16 (1.6773) and 35NiCrMo16, which are produced in Europe in accordance with EN 10027-1 standard (volumetric rolling) and EN 10027-2 (rolling tubes). The chemical composition of these steels is given below:

Element Carbon Carbon Carbon Magnesium Chrome Nickel Molybdenum
Content, % 0,35...0,38 Not more than 0.40 0,40...0,70 1,70...1,75 3,80...4,00 0,30...0,50

Company Evek GmbH offers to buy at producer price pipes, bars, rounds of structural alloy steels 34ХН3МА, 36NiCrMo16 (1.6773) and 35NiCrMo16. The supplier guarantees the adherence to the range of products supplied, as well as timely delivery to the customer.

Properties and application

The steels under consideration are characterized by the increased heat resistance and used for production of critical products of aviation and space technology, as well as such parts as rotors and disks of steam turbines, details of mechanical transmissions (gears, pinion shafts, clutches), exploitation of which is possible up to the temperatures of450-5000 C. Steel is sensitive to conditions of heating for hot forging and stamping, to temper embrittlement is not inclined to.

Basic physical and mechanical properties of steels:

  • Tensile strength, MPa - 950;
  • yield strength, MPa - 800;
  • Relative elongation, % - 12;
  • Relative narrowing of cross-section, % - 40;
  • Brinell hardness, NV - not more than 332.

Buy a bargain price from the manufacturer of the tube, rod, a circle of structural alloy steels 34XHN3MA, 36NiCrMo16 (1.6773) and 35NiCrMo16 offers the company Evek GmbH. All products are certified, delivery of rolled products is made in strictly established terms, to the address specified by the customer.