18hg - 16MnCr5 - 16hg circle, bar, forging

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
18HG 1.7131 5115 16MnCr5 Delivery from the stock, in stock

Evek GmbH offers to buy bulk rolled metal products and forgings made of structural alloy steels 18KhG, 16MnCr5, 16hg. The price is from the manufacturer. The supplier provides a range of supply of rolled products and forgings, as well as the delivery of products to the point specified by the consumer.

Chemical composition

18ХГ steel (GOST 4543) belongs to the group of low-carbon structural steels alloyed with chrome and manganese. This determines the following steel composition:

Element Carbon Silicon Manganese Chrome Nickel Copper
Percentage content 0,15...0,21 0,17...0,37 0,90...1,20 0,90...1,20 0.90 1.20 Up to 0.30 Up to 0.30

In the composition of steel allowed metallurgical impurities - sulfur and phosphorus - the percentage of which can not be higher than 0.035%.

The best known foreign analogues are steel 16 MnCr5 (1.7131), which is produced in Europe according to norms DIN 17200 and ISO 683-1, and also steel 16hg produced by Polish metallurgical industry. The chemical composition of steel 16 MnCr5 is as follows:

Element Carbon Silicon Manganese Chrome Sulfur Phosphorus
Percentage content 0,14...0,19 Not higher than 0,40 1,00...1,30 0,80...1,10 Up to 0.030 Up to 0,030

Company Evek GmbH offers to buy a circle, bar and forgings, made from chromium-manganese low-carbon steel grades 18KhG, 16MnCr5, 16hg. The advantageous price from the manufacturer. Supplier provides strict compliance with the range of products, as well as its prompt delivery to the point specified by the buyer.

Properties and application

Chromium and manganese alloyed structural steel 18Crg, 16MnCr5, 16hg can be subjected to different types of heat treatment. After tempering they have the following physical and mechanical properties:

  • Ultimate strength, MPa - 1000;
  • yield strength, MPa - 700;
  • Relative elongation, % - 21;
  • Relative narrowing, % - 62;
  • Brinell hardness - not more than 207.

Rolled sheets and forgings from the considered steel grades are subjected to carburizing and then used in the manufacture of small parts operating in conditions of high contact friction loads. The steels are prone to temper embrittlement and are also demanding in terms of forging temperature intervals.

Company Evek GmbH offers to buy a round, bars and forgings of chromium-manganese steel grades 18KhG, 16MnCr5, 16hg. The supplier guarantees a favorable price of products from the manufacturer. Delivery is provided to any point, which is set by the consumer.