Wire, round, rod 08H22N6T - ep53
|Mark||Analogue||W. Nr.||Aisi Uns||En||Order|
|08Х22Н6Т||EP53||Delivery from the stock, in stock|
Wire, circle and bar of an alloy of the brand 08H22N6T produced in our country for quite some time. Also produced a tape and sheet. Wire and rods can be either square or circular cross section. Products manufacturing standardized requirements TSMTU 664−41 (relative to the wire) and GOST 1525−53 (relative bar).
Composition and Properties
Steel 08H22N6T (EP53) is a nickel-chromium stainless steel alloy. It comprises 21−23% Cr, about 6% Ni, 08 at% of silicon and manganese, 0.4−0.6% titanium, 0.3% copper. Sulphur and phosphorus are in hundredths of a percent. The wire of the circle and the steel bars have a high resistance to corrosion, have a higher tensile strength at a sufficiently high ductility. They withstand heating in an atmosphere rich in oxygen or pure oxygen. Due to the high resistance to most of the concentrated alkali, hydrofluoric acid, a saturated salt sea water, such an alloy is widely demanded in various fields. It is not recommended to use air, enriched solutions of acids and acidic medium at a temperature above 375 ° C,
The percentage of 08H22N6T grade (GOST 5632−72)
|assortment||GOST||σ B||σ T||curing|
|Wire||18 143−72||430−510||---||without heat treatment|
|Forgings||25 054−81||343||539||— «-|
The σ — limit of short-term strength;
σ T — yield limit for residual deformation.
The wire rod and the circle of the alloy is able to maintain constant parameters in an environment saturated with neutral and caustic alkali salts in seawater, so are used for a salt production plant. These products are stable in contact with hydrofluoric acid, fluorine and fluorine compounds from dilute mineral acids — sulfuric, hydrochloric — under vacuum, and widely used by the chemical industry. They are used in food, medical, pharmaceutical, shipbuilding, textile, oil, etc. Industries.
In stock «Electrovek-steel» company offers a wide range of brand rolled 08H22N6T any parameters. All products are certified. The technical documentation includes data on the chemical composition, limiting the percentage of impurities; mechanical properties of products. We can buy in bulk, any semi-finished products for large-scale productions. We also offer optimal conditions for retail customers. High level of service and efficiency of service are the face of our company.
Buy at the best price
We provide for the implementation of an unlimited range of stainless steel alloys of the highest quality at a competitive price. If you are not sure, offers experienced managers who are always connected and ready to provide advice. Having made an order with us, you will receive certified products that comply with Russian and international standards of quality in the shortest possible time. If you value your time, contact today with our nearest office in Russia or in Ukraine, or order it over the Internet.