Circle, bar 20X23H18

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
20Х23Н18 EI417 1.4845 310S X12CrNi25-21 Delivery from the stock, in stock

Composition

Stainless steel round, bar 20X23H18 (AISI 310s) are made from austenitic grade alloy, its main alloying element in accordance with GOST 5632-72 is chromium, contained in an amount of 22-25%. The greater its proportion in the composition, the higher the corrosion resistance. If chromium is more than 17%, the steel becomes resistant in aggressive oxidizing environments. The 12-15% of Ni in the composition gives the necessary ductility and increases corrosion resistance and heat resistance. In addition, the alloy is alloyed with 2% manganese, 1% silicon, 0.2% carbon, thousandths of a percent phosphorus and sulfur.

Percent composition of grade 20Х20Н14С2 (GOST 5632-72)

Alloy C Si Mn Ni Cr P S Ti Fe
20Х20Н14С2 ≤0,2 ≤1 ≤2 17-20 22-25 ≤0,035 ≤0,025 --- basis

Production

Calibrated steel rod 20X23H18 is produced according to the following GOST: 7417-75, 8559-75, 8560-78. Grinded rod and silver - GOST: 14 955-77. Forged and forged blanks 20X23H18 - GOST: 1133-71. For the production of 20X23H18 bar use the methods of hot and cold rolling. The temperature of forging bars - 1170 ° C at the beginning of the process and 850 ° C at the end. The cross section of the bar has a circular shape. In some cases ovality deviation is allowed - the difference between the largest and smallest diameters within one cross-section should not be more than 50%.

Mechanical properties of rolled products atto 20o C

Range GOST σB σT d5 Heat treatment
Bar, 5949-75 490 196 35 Tempering 1100 - 1150o C, air
Thick plate 7350-77 540 265 35 Tempering 1030 - 1130o C, water cooling
Thin plate 5582-75 510 245 35 Tempering 1080 - 1150o C, water cooling
Thin sheet 4986-79 570 19-38 Tempering 1050 - 1080o C, air cooling

σB - short-term strength limit;

σT - yield strength for permanent deformation;

d5 - relative elongation at break.

Classification

  • According to accuracy - typical, high and increased, according to it the product receives marking B, A or C;
  • According to shape - rolled product with a diameter of up to 9 mm is supplied in coils, with a larger diameter - in the form of bars;
  • Lengths - short, measured and multiple of measured. High-alloy steel bars are supplied in lengths of 1-6 m;

Application

Forgings, parts of combustion chambers, bandages, clamps, hangers, parts of boiler mounts, muffles for operation at t° 1100 °C. Steel circle can be used for the production of springs, washers and other technological products. In construction - as a reinforcing element, for, the manufacture of stairs, balconies, in the systems of grounding and lightning protection. From such a circle make fasteners in the constructions of high-speed trails, bridges and tunnels. This product perfectly prevents the aggressive effects of the external environment and is actively used in the marine industry.

Delivery

Evek GmbH has a wide range of stock of 20X23H18 steel of any parameters. All products are certified. The technical documentation includes data on the chemical composition, the limiting percentage of impurities; mechanical properties of products. From us you can buy in bulk any semi-finished products for large-scale productions. We also offer optimum conditions for retail buyers. High level of service and prompt service is the face of our company.

Buy at the best price

We offer for sale an unlimited range of stainless alloys of the highest quality at a competitive price. If you have difficulty in choosing, experienced managers who are always available and ready to provide consultative assistance are at your service. If you make an order you receive certified products that meet international quality standards in the shortest possible time. If you value your time, contact our nearest office today or place your order online.