Tape 29nk - alloy

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
29NK 1.3981 K94610 NiCo29-18 Delivery from the stock, in stock
29NK-t 1.3981 K94610 NiCo29-18 Delivery from the stock, in stock
29NK-m 1.3981 K94610 NiCo29-18 Delivery from the stock, in stock

Relevance

A hundred years ago nickel was a rarity, and only a few people could afford to use it. And when the Austrian emperor, whose palace had a lot of nickel tableware, fell ill with an unknown disease, for a time this metal was removed from use altogether. Today, nickel has become an alternative to silverware, but it can still be a source of allergies for some people. Nickel rolled nickel is now so widespread that it is used in almost all industries.

Production

29NK is melted in arc furnaces using the electroslag method. The alloying components are introduced into the composition in the form of ferroalloys. During the production process, the chemical composition is monitored very closely, which is why 29NK is classified as precision steel. Sheet 29NK is available in two versions: annealed, which is cold rolled to increase elasticity, and soft, which is called annealed.

Percent composition

Co Ni Fe Mn С Si
17 29 up to 54 0.3 up to 0.01 0.2

Production

Significant percentage of nickel allows rolling wire or foil with thickness in microns. The production of 29NK tape is regulated by GOST 15 515-70. The manufacturer guarantees a minimum deviation from the standards. According to State Standard the tape thickness = 0.05-2 mm with a downward deviation of 0.01-0.1 mm. The standard length is 2.5 m, and the width is 1-30 cm with a deviation of +0,2-1 mm. Tape 29NC thickness 0,1-0,5 mm by agreement with the customer can be produced in a length of about 100 m, but then it will have discernible welding seams. Weight of a square meter of the product depends on the thickness and can be from 0.5 to 18 kg. The surface is flat and smooth, minor damages are allowed: marks, traces of broaching, color variations. The color changes are stipulated by the standard and depend on storage conditions. Tape 29NK may be referred to as a strip, if it implies a cut.

Applications

Alloy 29NK serves for the production of medical instruments, the electrical filling of automobiles and airplanes, physical and chemical research. Tape 29NK is in demand in electrical engineering to create electric heaters with a stable high level of electrical resistance. For this purpose, especially thin ribbon or wire with thickness of 5-20 microns is used.

Delivery

All products are certified. The technical documentation includes data on the chemical composition, the limiting percentage of impurities; mechanical properties of the products. From us you can buy in bulk a variety of semi-finished products for large-scale production. We also offer good conditions for retail buyers. You will be satisfied with the level of service and efficiency of service.

Buy at a bargain price

Evek GmbH offers its customers an unlimited choice of precision steel of the highest quality at a competitive price. If you can't choose, our experienced managers are always available and ready to consult you. Ordering from us you get certified products that meet international quality standards in the shortest possible time. If you value your time, contact our nearest office today, or order online.