Sheet, strip 10х23н18 - 1.4842

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
10X23H18 1.4842 310S X12CrNi25-20 Delivery from the stock, in stock

Supplier

We offer to buy sheets, strips 10Х23Н18 from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. The supplier Evek GmbH offers to buy a sheet, a strip 0Х23Н18, the price - optimal in the given segment of rolled products.

Technical characteristics

Stainless heat-resistant chrome-nickel steel. The basis of the alloy is iron: its share in the composition of about 55%. /In addition the composition is alloyed with manganese, titanium, copper. It is used in manufacture of sheet metal parts, pipes, tube fittings under low loads up to 1000°C.

Percentage composition GOST 5632-72

Fe C Si Mn Ni S P Cr Ti Cu Impurities
base ≤0.1 ≤1 ≤2 17 - 20 ≤0.02 ≤0.035 22 - 25 ≤0.2 ≤0.3 ≤0.3

Specific gravity 7.95 g/cm3. Hardness after hardening (GOST 25054-81) HB 10-1 = 179 MPa. Tendency to temper embrittlement:

Mechanical properties (t° 20°C)

Range GOST Size s in sT d5 y Heat treatment
-
mm MPa MPa % % -
Cold-deformed tube 9941-81 529 35
Rods 5949-75
Ø 60 490 196 35 50 Tempering 1100 - 1150 °C, air,
Forgings 25054-81 490 196 30-35 40-47

Analogues

Australia England EU Germany Italy Spain China USA France Sweden Japan
AS BS EN DIN, WNr UNI UNE GB AFNOR SS JIS
310S 310S16 1.4842 1.4842 X6CrNi25-20 F.331 0Cr25Ni20 310S Z12CN25-20 2361 SUH310
310S24 1.4845 S31000 Z12CN26-21 SUS310S
310S94 X10CrNiSiN21-11 S31008 Z8CN25-20
X12CrNi25-20 S31009
X8CrNi25-21 X8CrNi25-21 X12CrNi25-21 X8CrNi25-21
X9CrNiSiNCe21-11-2

Buy, bargain price.

We offer sheet, strip 10X23H18 - 1.4842, the price - is determined by the technological features of production without the inclusion of additional costs. It is possible to order products with non-standard parameters. In the segment of stainless steel, the company Evek GmbH is a profitable supplier.